Setting the time and day of the week.
The time and day of the week must be set for your program schedule to operate correctly.
1.Slide the Function switch to the Off position.
2.Press the Hold button in for 6 seconds.
3. Press the < or > button to adjust the time in hours. Press the Hold button once. Now press the < or > button to adjust the time in minutes.
4.Press the Hold button while
the time is displayed. The display shows the day currently set on the thermostat (01 = Monday, 02 = Tuesday, etc.).
OFF PM
PM
TODAY 
5. Press the < or > button to set the current day of the week. Note: Sliding the Function switch to Cool or Heat positions will lock the values into memory. You may also press the Hold button to enter your programming schedule.
14