Turning On/Off the Backlight
MODE
HUMIDITY
MODE
Press the MODE button. While holding the MODE, press the HUMIDITY button to enter Setup screens.
Press the MODE button repeatedly until this setup screen appears.
Note: Press the MODE button momentarily to move through the setup screens. Press and hold the MODE button to move back- wards through the setup screens.
Select backlight operation: ON - Light continuously. OFF - Light for 8 seconds
after a button press.
Setup 3
ON
7
Press
MODE
Programming the Thermostat to Display Temperature in Fahrenheit or Celsius
C
Select thermostat operation in degrees Fahrenheit or Celsius.
F
fSetup 4
Press
HUMIDITY
Press the HUMIDITY button to leave the Setup screens. If no buttons are pressed, the display will leave the setup screens after 30 seconds.
Page 7.2