Bryant PSPHA732 warranty Default Program, Override, FAN Modes

Page 6

•If a second stage of heat is called for, the flashing rate of HEAT increases

•If the 3rd stage of heat activates, the display will also flash "AUX " in addition to HEAT flashing.

5.7 COOL

•Use COOL mode to control your air conditioner, cooling your home.

•In COOL mode, COOL is displayed right of the set temperature.

•COOL will display solid if there is no load.

•While the 1st stage of cooling is active, COOL will flash.

•If a second stage of cooling is called for, the flashing rate of COOL increases

5.8 OFF

•Slide the MODE switch to OFF when no heating or cooling is desired. Heating and cooling will be disabled, and the set temperature side of the display will be empty.

5.9 DEFAULT PROGRAM

•As supplied from the factory, your thermostat will use its default program for temperature control. This program and all other settings may be restored to their default values via a SOFTWARE RESET. Please refer to DEFAULT TEMPERATURE PROGRAM for program times and temperatures.

5.10 HOLD

Hold is the simplest method to maintain fixed set temperatures.

•Press HOLD once to enter permanent temperature HOLD while in RUN or OVERRIDE. HOLD will be displayed above the set temperature in the display.

•Pressing this button again will toggle HOLD off and return to RUN and the programmed set temperature.

•Changing system mode or rotating the SPEED DIAL® will also cancel a HOLD.

5.11 OVERRIDE

During RUN, set temperatures may be temporarily altered from their programmed values. Immediately after a set temperature has been altered, the 2-hour default duration may be adjusted within the range from 1 to 4 hours. The temporary set temperature(s) will be used for the duration of the OVERRIDE.

•Press either the UP or DOWN key. The current modes set temperature will begin to flash.

•Adjust the set temperature as desired.

•After a few seconds, the default 2-hour duration will flash in the time area of the display.

•Adjust the duration in 15-minute increments, from between 1 to 4 hours.

•When the duration stops flashing, the OVERRIDE has been initiated and the Set Temperature side of the display will show

OVERRIDE.

•The adjust temperature will remain the set temperature in the current mode for the duration of the OVERRIDE. Then temperature settings return to their program values.

•OVERRIDE may be cancelled by initiating a HOLD and then canceling it, changing the position of the mode switch, or rotating the

SPEED DIAL®.

5.12 FAN MODES

•The FAN switch controls which of three fan modes your thermostat is to use. These modes are AUTO, CLEAN and ON.

5.12.1 AUTO

•AUTO mode runs the fan only to fulfill your heating and cooling requirements.

5.12.2 ON

• ON mode runs your system fan continuously.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents PSPHA732 Features CompatibilityElectrical Ratings Removal of OLD Unit Installation Tools RequiredLocation MountingTape the ends of any unused wires WiringAlso Refer to the Heat Pump Cross-reference Chart on Terminal DescriptionsEmergency Emer Operating Basics UP/DOWN Change KeysSET DAY and Time Autochange AutoDefault Program OverrideFAN Modes Display Illumination Clean CycleSet to HEAT, COOL, or Auto with the mode switch Audible Beep600 AM Weekend ProgrammingTime 800 AMFilter Monitor Advanced Features Keyboard LockCopy Filter UsageSoftware Reset ResetHardware Reset Temperature Variation / SwingSET UP Options Dead BandMinimum RUN Time J3 Temperature Display Format F/C Display J5Smart Recovery J6 Clock Format J4Battery Installation Re-hang it on its base plate as described in installationTechnical Assistance Warranty Wiring Diagram Notes Dashed wires are optionalCross Reference Chart for MULTI-STAGE Heat Pumps User Program Table Mercury Warning and Recycling Notice

PSPHA732 specifications

The Bryant PSPHA732 is a top-tier heat pump model designed to provide efficient heating and cooling solutions for residential and light commercial applications. Known for its impressive performance and reliability, this unit exemplifies modern HVAC technology, striking a perfect balance between comfort and efficiency.

One of the standout features of the Bryant PSPHA732 is its advanced variable-speed compressor, which allows for precise temperature control and exceptional energy efficiency. This technology enables the heat pump to operate at multiple speeds, adjusting seamlessly to the heating or cooling demand. As a result, homeowners can enjoy more consistent indoor temperatures while minimizing energy consumption, leading to significant savings on utility bills.

The PSPHA732 also boasts a high Seasonal Energy Efficiency Ratio (SEER) and Heating Seasonal Performance Factor (HSPF), making it one of the most efficient options in the market. With a SEER rating of up to 17 and an HSPF rating of up to 10, this unit qualifies for various energy-efficiency programs and tax credits, further enhancing its value proposition.

Another key characteristic of the Bryant PSPHA732 is its innovative design, which incorporates sound-dampening technology. This includes a specially designed fan and insulated compressor compartment, leading to quieter operation compared to traditional models. This is especially beneficial for homeowners seeking a peaceful indoor environment.

The unit’s durable construction is another highlight, featuring a weather-resistant cabinet designed to withstand harsh outdoor conditions. The galvanized steel exterior, combined with a factory-installed coat of paint, ensures long-lasting performance, protecting the unit from rust and corrosion.

Furthermore, the Bryant PSPHA732 is equipped with advanced controls and connectivity options. It is compatible with Bryant’s smart thermostat, allowing users to monitor and adjust their HVAC system remotely through a smartphone app. This integration not only enhances convenience but also optimizes energy use based on the homeowner's schedule and preferences.

Lastly, the PSPHA732 comes with a comprehensive warranty, providing peace of mind for users. With proper maintenance, this heat pump is designed to offer years of reliable service, making it a smart investment for those looking to enhance their home’s comfort and efficiency.

Overall, the Bryant PSPHA732 stands out as a leading choice in the heat pump market, combining cutting-edge technology, energy efficiency, and user-friendly features to deliver an exceptional climate control experience.
Top Page Image Contents