Bryant PSPHA732 Copy, Advanced Features Keyboard Lock, Filter Monitor, Filter Usage, Filter Limit

Page 9

0 to 60 minutes in increments of 3 minutes. Set 0 MIN/HR to allow AUTO control for particular periods while CLEAN is used in others. Set the fan duration to 60 MIN/HR to run the fan continuously for this period.

•Press NEXT to advance to the next period. After the four program periods of day have been programmed, pressing NEXT will advance to the following day’s MORN period.

•One period ends at the start time of the next period. The end of one period may not be any closer to the beginning of the next period than one 15-minute increment. Moving a start time too close to the next start time results in the latter time being pushed ahead too.

•Rotate the dial away from the SET FAN PROGRAMS/AIR FILTER position to exit fan programming.

6.4 COPY

•Pressing COPY will copy the previous day’s temperature or fan program into the current day and advance the thermostat to the beginning of next day.

7. ADVANCED FEATURES

7.1 KEYBOARD LOCK

•To prevent tampering Press NEXT, NEXT, NEXT, HOLD. This sequence of keys will lock and unlock all settings and programs. When locked, a padlock icon will be visible

above the time / temperature

area of the display.

7.2 FILTER MONITOR

•Your thermostat will warn you that your HVAC system’s air filter should be changed by displaying FILTER in the time temperature display area, after the system’s fan has run the number of hours specified by this limit.

7.2.1 FILTER USAGE

To view the number of hours the thermostat has activated the fan since the last timer reset:

•Rotate the dial to the AIR FILTER position. The current filter usage will be shown with HRS FILTER.

•To reset the timer to 0, press UP or DOWN once. Pressing UP or DOWN again will toggle between 0 and the current value. The value in display when you exit this mode will be the value retained in memory. Leave the value at 0 to reset the timer.

•To exit the AIR FILTER mode, rotate the dial to another position.

7.2.2 FILTER LIMIT

This general rule will provide you with a good estimate of your filter’s life in hours. Assume that the fan will run at 1/3 duty cycle or 8 hours per day. Common 90-day filters are then good for 90*24/3=720 hours of use. This is the default limit value. Setting the filter counter limit to 0000 will disable the change filter indicator. Valid entries are from 0 to 2000 hours.

To set the number of hours of filter use before replacement is indicated:

•Rotate the dial to the AIR FILTER position. The current filter usage will be shown with HRS FILTER.

•Hold NEXT for 2 seconds. The Filter limit will be displayed.

•Refer to your Air Filter package to determine your filter’s recommended life. If given in days, multiply by 8 to find the recommended setting in hours of filter usage.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents PSPHA732 Features CompatibilityElectrical Ratings Location Installation Tools RequiredRemoval of OLD Unit MountingAlso Refer to the Heat Pump Cross-reference Chart on WiringTape the ends of any unused wires Terminal DescriptionsSET DAY and Time Operating Basics UP/DOWN Change KeysEmergency Emer Autochange AutoDefault Program OverrideFAN Modes Set to HEAT, COOL, or Auto with the mode switch Clean CycleDisplay Illumination Audible BeepTime Weekend Programming600 AM 800 AMCopy Advanced Features Keyboard LockFilter Monitor Filter UsageHardware Reset ResetSoftware Reset Temperature Variation / SwingDead Band SET UP OptionsSmart Recovery J6 Temperature Display Format F/C Display J5Minimum RUN Time J3 Clock Format J4Battery Installation Re-hang it on its base plate as described in installationTechnical Assistance Warranty Dashed wires are optional Wiring Diagram NotesCross Reference Chart for MULTI-STAGE Heat Pumps Mercury Warning and Recycling Notice User Program Table

PSPHA732 specifications

The Bryant PSPHA732 is a top-tier heat pump model designed to provide efficient heating and cooling solutions for residential and light commercial applications. Known for its impressive performance and reliability, this unit exemplifies modern HVAC technology, striking a perfect balance between comfort and efficiency.

One of the standout features of the Bryant PSPHA732 is its advanced variable-speed compressor, which allows for precise temperature control and exceptional energy efficiency. This technology enables the heat pump to operate at multiple speeds, adjusting seamlessly to the heating or cooling demand. As a result, homeowners can enjoy more consistent indoor temperatures while minimizing energy consumption, leading to significant savings on utility bills.

The PSPHA732 also boasts a high Seasonal Energy Efficiency Ratio (SEER) and Heating Seasonal Performance Factor (HSPF), making it one of the most efficient options in the market. With a SEER rating of up to 17 and an HSPF rating of up to 10, this unit qualifies for various energy-efficiency programs and tax credits, further enhancing its value proposition.

Another key characteristic of the Bryant PSPHA732 is its innovative design, which incorporates sound-dampening technology. This includes a specially designed fan and insulated compressor compartment, leading to quieter operation compared to traditional models. This is especially beneficial for homeowners seeking a peaceful indoor environment.

The unit’s durable construction is another highlight, featuring a weather-resistant cabinet designed to withstand harsh outdoor conditions. The galvanized steel exterior, combined with a factory-installed coat of paint, ensures long-lasting performance, protecting the unit from rust and corrosion.

Furthermore, the Bryant PSPHA732 is equipped with advanced controls and connectivity options. It is compatible with Bryant’s smart thermostat, allowing users to monitor and adjust their HVAC system remotely through a smartphone app. This integration not only enhances convenience but also optimizes energy use based on the homeowner's schedule and preferences.

Lastly, the PSPHA732 comes with a comprehensive warranty, providing peace of mind for users. With proper maintenance, this heat pump is designed to offer years of reliable service, making it a smart investment for those looking to enhance their home’s comfort and efficiency.

Overall, the Bryant PSPHA732 stands out as a leading choice in the heat pump market, combining cutting-edge technology, energy efficiency, and user-friendly features to deliver an exceptional climate control experience.
Top Page Image Contents