Clean Cycle, Display Illumination, Audible Beep

5.12.3 CLEAN CYCLE®

•LUX’s Clean Cycle® allows you to program a forced air system to flow air through your system’s filter, cleaning the air in your home, even when heating or cooling is not being utilized. In CLEAN mode the fan maintains the programmed minimum run time; it may run additional time as required to maintain temperature control. The program used avoids additional fan time when the minimum run time has been met over the last hour through temperature control. Minimum fan run times are met by running one-third the hourly requirement at twenty-minute intervals. The default minimum fan run time is 15 minutes per hour.

5.13 DISPLAY ILLUMINATION

For visibility in the dark, your LUX thermostat incorporates an attractive electro-luminescent display backlight.

•Press the light bulb button right of the display to illuminate.

•Pressing this or other buttons will keep the display illuminated.

5.14 AUDIBLE BEEP

When a key is pressed, the thermostat will emit an audible beep. The beep will terminate within 1⁄2 second while a button is held.

6. PROGRAMMING

6.1DEFAULT TEMPERATURE PROGRAM As supplied from the factory, the following program will be used for temperature control in RUN MODE. This program and all other software settings may be restored to their default values via a SOFTWARE RESET.

PERIOD	HEAT MODE	COOL MODE
Morning	6:00 AM 700F (210C)	6:00 AM 780F (260C)
Day	8:00 AM 620F (170C)	8:00 AM 850F (290C)
Evening	6:00 PM 700F (210C)	6:00 PM 780F (260C)
Night	10:00 PM 620F (170C)	10:00 PM 820F (290C)

6.2EDITING HEAT OR COOL PROGRAMS You can change any preset times and/or temperatures to suit your schedule for each day of the week (7 Day Programming). The four periods each day are named Morning (MORN), Day, Evening (EVE), and Night (NITE).

6.2.1WEEKDAY PROGRAMMING To change the HEAT or COOL program:

• Set to HEAT, COOL, or AUTO with the mode switch.

• Rotate dial to SET WEEKDAY PROGRAMS. PROGRAM, Mo, MORN and START AT will be displayed, with the Set Time flashing.

Programming is performed in the following order.

1Mo Morn Start Time

2Mo Morn Heat Set Temperature

3Mo Morn Cool Set Temperature

4Mo Day Start Time

5Mo Day Heat Set Temperature

6. . . and so on until Fri Nite is fully programmed at which point pressing NEXT again will begin the list at Mo Morn Start Time.

•Use the UP/DOWN keys to change the start time for this period. Press UP/DOWN buttons to change the time in 15-minute increments. Hold UP/DOWN button to change the time at rate of 60 minutes/second.

•One period ends at the start time of the next period. The end of one period may not be any closer to the beginning of the next period than one 15-minute increment. Moving a start time too close to the next start time results in the latter time being pushed ahead too. Press NEXT

PSPHA732 specifications

The Bryant PSPHA732 is a top-tier heat pump model designed to provide efficient heating and cooling solutions for residential and light commercial applications. Known for its impressive performance and reliability, this unit exemplifies modern HVAC technology, striking a perfect balance between comfort and efficiency.

One of the standout features of the Bryant PSPHA732 is its advanced variable-speed compressor, which allows for precise temperature control and exceptional energy efficiency. This technology enables the heat pump to operate at multiple speeds, adjusting seamlessly to the heating or cooling demand. As a result, homeowners can enjoy more consistent indoor temperatures while minimizing energy consumption, leading to significant savings on utility bills.

The PSPHA732 also boasts a high Seasonal Energy Efficiency Ratio (SEER) and Heating Seasonal Performance Factor (HSPF), making it one of the most efficient options in the market. With a SEER rating of up to 17 and an HSPF rating of up to 10, this unit qualifies for various energy-efficiency programs and tax credits, further enhancing its value proposition.

Another key characteristic of the Bryant PSPHA732 is its innovative design, which incorporates sound-dampening technology. This includes a specially designed fan and insulated compressor compartment, leading to quieter operation compared to traditional models. This is especially beneficial for homeowners seeking a peaceful indoor environment.

The unit’s durable construction is another highlight, featuring a weather-resistant cabinet designed to withstand harsh outdoor conditions. The galvanized steel exterior, combined with a factory-installed coat of paint, ensures long-lasting performance, protecting the unit from rust and corrosion.

Furthermore, the Bryant PSPHA732 is equipped with advanced controls and connectivity options. It is compatible with Bryant’s smart thermostat, allowing users to monitor and adjust their HVAC system remotely through a smartphone app. This integration not only enhances convenience but also optimizes energy use based on the homeowner's schedule and preferences.

Lastly, the PSPHA732 comes with a comprehensive warranty, providing peace of mind for users. With proper maintenance, this heat pump is designed to offer years of reliable service, making it a smart investment for those looking to enhance their home’s comfort and efficiency.

Overall, the Bryant PSPHA732 stands out as a leading choice in the heat pump market, combining cutting-edge technology, energy efficiency, and user-friendly features to deliver an exceptional climate control experience.