Bryant PSPHA732 warranty Weekend Programming, Time, 600 AM, 800 AM, 600 PM

Page 8

to accept the displayed start time and advance to the HEAT SET TEMPERATURE, it will flash to show that it may be edited.

•The HEAT SET TEMPERATURE will be displayed on the right side of the display with the HEAT indicator visible.

•Edit the HEAT SET TEMPERATURE, then press NEXT to accept and advance to the COOL SET TEMPERATURE, it will flash to show that it may be edited.

•There is a minimum value that be maintained between the HEAT SET TEMPERATURE and COOL SET TEMPERATURE. That value is called the Dead band. Its default is 3˚F. It is programmable and may be changed. See ADVANCED FEATURES. If you move the heat set temperature too close to the cool set temperature, the cool set temperature will move away from the heat set temperature to maintain the Dead Band. Conversely, the heat set temperature will move if you adjust the cool set temperature too close.

•Edit the COOL SET TEMPERATURE, then press NEXT to accept and advance to the next period.

•When you have changed the Cool set temperature to your desired temperature, press NEXT to advance to the next period. Its start time will be flashing indicating that it is under edit.

•When all the periods for a day have been set, the start time for the next weekday Morning period will be displayed to begin editing the settings for that day.

•Complete programming for all weekdays and rotate the dial back to RUN to accept all current values and end the programming session.

6.2.2 WEEKEND PROGRAMMING

Weekend programming is identical to weekday programming except that you must rotate the dial to SET WEEKEND PROGRAMS and the sequence of days that you may program is Sa and Su, then repeating this two day sequence.

6.3CLEAN CYCLE® (IAQ FAN PROGRAMMING)

Clean Cycle® programming is similar to temperature programming. It has four consecutive periods, which are independent of the four temperature periods. The default setting for your systems fans CLEAN CYCLE® program requires it to run at least 15 minutes per hour. Default Program periods are:

Default Periods

Time

MORN

6:00 AM (6:00)

DAY

8:00 AM (8:00)

EVE

6:00 PM (18:00)

NIGHT

10:00 PM (22:00)

To edit the CLEAN CYCLE® program:

•Move Fan switch to CLEAN.

•Rotate the dial to AIR FILTER.

•Press HOLD for 2 seconds.

•PROGRAM, FAN, START AT, MO (day) and MORN (period) will all be visible. Current start time will flash in time area.

Program is performed in the following order.

1Mo Morn Start Time

2Mo Morn Minimum ON Time

3Mo Day Start Time

4Mo Day Minimum ON Time

5. . . and so on until Sun Night is fully programmed at which point pressing NEXT again will begin the list at Mo Morn Start Time.

•Press UP/DOWN to change start time for this period in 15-minute increments. Hold UP/DOWN button to change the time at rate of 60 minutes/second.

•Press NEXT to accept the start time, and advance to set minimum fan on time per hour. Current minimum fan run time will flash with MIN/HR.

•Press UP/DOWN to alter the minimum ON Time setting by 3 minutes. Time can be adjusted from

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents PSPHA732 Electrical Ratings FeaturesCompatibility Installation Tools Required LocationRemoval of OLD Unit MountingWiring Also Refer to the Heat Pump Cross-reference Chart onTape the ends of any unused wires Terminal DescriptionsOperating Basics UP/DOWN Change Keys SET DAY and TimeEmergency Emer Autochange AutoFAN Modes Default ProgramOverride Clean Cycle Set to HEAT, COOL, or Auto with the mode switchDisplay Illumination Audible BeepWeekend Programming Time600 AM 800 AMAdvanced Features Keyboard Lock CopyFilter Monitor Filter UsageReset Hardware ResetSoftware Reset Temperature Variation / SwingSET UP Options Dead BandTemperature Display Format F/C Display J5 Smart Recovery J6Minimum RUN Time J3 Clock Format J4Technical Assistance Warranty Battery InstallationRe-hang it on its base plate as described in installation Wiring Diagram Notes Dashed wires are optionalCross Reference Chart for MULTI-STAGE Heat Pumps User Program Table Mercury Warning and Recycling Notice

PSPHA732 specifications

The Bryant PSPHA732 is a top-tier heat pump model designed to provide efficient heating and cooling solutions for residential and light commercial applications. Known for its impressive performance and reliability, this unit exemplifies modern HVAC technology, striking a perfect balance between comfort and efficiency.

One of the standout features of the Bryant PSPHA732 is its advanced variable-speed compressor, which allows for precise temperature control and exceptional energy efficiency. This technology enables the heat pump to operate at multiple speeds, adjusting seamlessly to the heating or cooling demand. As a result, homeowners can enjoy more consistent indoor temperatures while minimizing energy consumption, leading to significant savings on utility bills.

The PSPHA732 also boasts a high Seasonal Energy Efficiency Ratio (SEER) and Heating Seasonal Performance Factor (HSPF), making it one of the most efficient options in the market. With a SEER rating of up to 17 and an HSPF rating of up to 10, this unit qualifies for various energy-efficiency programs and tax credits, further enhancing its value proposition.

Another key characteristic of the Bryant PSPHA732 is its innovative design, which incorporates sound-dampening technology. This includes a specially designed fan and insulated compressor compartment, leading to quieter operation compared to traditional models. This is especially beneficial for homeowners seeking a peaceful indoor environment.

The unit’s durable construction is another highlight, featuring a weather-resistant cabinet designed to withstand harsh outdoor conditions. The galvanized steel exterior, combined with a factory-installed coat of paint, ensures long-lasting performance, protecting the unit from rust and corrosion.

Furthermore, the Bryant PSPHA732 is equipped with advanced controls and connectivity options. It is compatible with Bryant’s smart thermostat, allowing users to monitor and adjust their HVAC system remotely through a smartphone app. This integration not only enhances convenience but also optimizes energy use based on the homeowner's schedule and preferences.

Lastly, the PSPHA732 comes with a comprehensive warranty, providing peace of mind for users. With proper maintenance, this heat pump is designed to offer years of reliable service, making it a smart investment for those looking to enhance their home’s comfort and efficiency.

Overall, the Bryant PSPHA732 stands out as a leading choice in the heat pump market, combining cutting-edge technology, energy efficiency, and user-friendly features to deliver an exceptional climate control experience.
Top Page Image Contents