Bryant T2-PAC installation instructions Features and Accessories, Batteries, Display Lighting

Page 22

FEATURES AND ACCESSORIES

Home, Away, Sleep (programmable models only)

This feature provides three button selections which select from three predetermined pairs of heat and cool setpoints. In programmed versions, one of these three choices can be selected for any programmed period. To change these settings, a temperature is first selected and then the key pressed and held, similar to setting stations on a push-button radio. See Owner’s Manual for details.

Clock (programmable models only)

Without batteries the clock will continue to operate for 8 hours while power is removed. With batteries, the clock operates until the end of the battery life.

Batteries

Battery operation is available for installations where there is no common (C) wire available at the thermostat or where operation is to continue while the thermostat is removed from the wall, usually to facilitate remote (armchair) programming. For battery operation, install two alkaline AA batteries. The thermostat is designed to operate up to one year on a set of batteries. A battery indicator on the display warns when battery replacement is needed. See Homeowners Guide for details. If batteries are installed and the thermostat is operated from 24VAC power, battery operation will occur only when 24VAC power is not present. The changeover between 24VAC power and battery power is automatic.

Display Lighting

The display has two levels of lighting, high level and low level. High level lighting comes on for 10 seconds when the door is opened and/or buttons are being pressed with 24VAC and with batteries. Low level lighting is only available if the thermostat is operated from 24VAC. It is not available with batteries. The low level can be selected (see Option 18) for continuous backlight.

20

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Legacy Series Programmable Thermostat Designed and Assembled in the U.S.APage Table of Contents Safety Considerations Introduction Power Installation ConsiderationsModels Installation Thermostat LocationEnvironmental Hazard Backplate Mounting Secure Wires to Terminal Strip Terminal Designations Set Thermostat Configuration Configuration Options Summary To Enter the Configuration Mode Configuration Options SelectionOption 01 Equipment type Option 07 Zoning Option 03 Fahrenheit/CentigradeOption 04 Fan G on with W output Option 10 Reversing valveOption 12 Smart Recovery programmable model only Option 11 Minimum Deadband Between Heating And CoolingOption 16 Maximum Cycles Per Hour Option 13 Room Air Temperature OffsetOption 15 Auto Changeover Availability Option 17 Minimum Time Between Equipment StagesOption 18 Backlight Configuration Option 21 Keypad LockoutOption 26 Minimum Cooling Setpoint Option 99 Reset to Factory DefaultsOption 27 Maximum Heating Setpoint Check Thermostat Operation Checklist Batteries Features and AccessoriesDisplay Lighting Door Switch Mounting OptionsOperational and Connection Information WiringTimers Rc/Rh ConnectionsCycle Timer Error CodesMinimum On Timer Auto Changeover TimerOutputs Cool Heat EM HeatWiring Diagrams Single Speed A/C Thermostat Typical InstallationWiring Diagrams Single-stage Furnace with Air Conditioner and Split Power Thermostat Heat Stage 3 furnace Heat/Cool Stage Fan 24VAC Hot Heating FV/FK Fan Coil w/2-Stage Air Conditioner FV/FK Fan Coil w/2-Stage Heat Pump Thermostat Configuration Record Mode SettingsConfiguration Options Page Page Page Page IIT2---PAC---05

T2-PAC specifications

The Bryant T2-PAC is a standout unit in the realm of high-efficiency heating, ventilation, and air conditioning (HVAC) systems. Designed with modern comfort in mind, this system embodies advanced technologies and features that provide optimal performance and energy savings, making it a preferred choice for numerous homeowners and commercial spaces.

One of the key highlights of the Bryant T2-PAC is its innovative two-stage cooling and heating capabilities. This feature ensures that the system can modulate its output to meet varying comfort demands efficiently. By operating at a lower stage most of the time, the T2-PAC minimizes energy consumption while still delivering reliable heating or cooling when required, ensuring maximum comfort throughout the day and night.

Incorporating advanced inverter technology, the Bryant T2-PAC stands out with exceptional energy efficiency ratings. This technology allows the system to adjust its compressor speed based on real-time indoor temperature demands, addressing fluctuations in a home or building's environment swiftly. As a result, users may enjoy lower utility bills while remaining comfortable regardless of the season.

The system also features a robust build quality with stainless steel components that enhance durability and extend the unit's lifespan. Its smart design emphasizes quieter operation, ensuring that the system runs discreetly without disrupting daily life or activities.

In addition to its performance, the Bryant T2-PAC offers convenient smart home integration through user-friendly controls. Homeowners can easily adjust settings via mobile applications or voice-controlled devices, enhancing user experience and accessibility.

The T2-PAC is designed with eco-conscious consumers in mind. Its eco-friendly refrigerant reduces the system’s environmental impact while maintaining performance. Moreover, the Bryant brand is known for its commitment to reliability and comfort, evidenced by its extensive warranty offerings and the robust customer support network.

In summary, the Bryant T2-PAC incorporates innovative technologies and features that ensure efficient and effective climate control. With its two-stage operation, advanced inverter technology, durable build, quiet operation, smart home compatibility, and eco-friendly design, the T2-PAC is truly a versatile heating and cooling solution suitable for diverse environments. Investing in this unit means investing in enduring comfort and significant energy savings for the long term.
Top Page Image Contents