Bryant T2-PAC installation instructions Installation, Thermostat Location

INSTALLATION

Step 1 — Thermostat Location

SApproximately 5 ft (1.5m) from floor.

SClose to or in a frequently used room, preferably on an inside partition- ing wall.

SOn a section of wall without pipes or duct work. Thermostat should NOT be mounted

SClose to a window, on an outside wall, or next to a door leading to the outside.

SExposed to direct light or heat from the sun, a lamp, fireplace, or other temperature-radiating objects which could cause a false reading.

SClose to or in direct airflow from supply registers and return-air re- gisters.

SIn areas with poor air circulation, such as behind a door or in an alcove.

Step 2 — Install Thermostat

!WARNING

ELECTRICAL OPERATION HAZARD

Failure to follow this warning could result in personal injury or death.

Before installing thermostat, turn off all power to equipment. There may be more than one power disconnect.

1.Turn OFF all power to unit.

2.If an existing thermostat is being replaced: a. Remove existing thermostat from wall.

5