Guardian Technologies ACT1000, ACT2000 Timed Actions, Action What Happens, Communications

Page 20

ACT1000/2000 Operating Instructions

Software Version 3.23-00

Timers

The door timers menu allows the installer to program the time delays for the relay, AUX output, open collector outputs OP2 and OP3 and the door ajar alarm time. Each timer may be programmed with a duration from 1 to 999 seconds. The relay time may be programmed to 0 seconds, which will operate the relay for a quarter of a second approximately. This can be used for turnstile applications. Door Stations will support a maximum duration of 127 seconds.

Timed Actions

This Menu allows the user to set up a number of timed actions that are linked to timezones. Any combination of up to eight timezones may be assigned to an action. When any one of these timezones is in force, then the assigned action occurs for that duration.

Action

What Happens.

 

Unlock Door

For the duration of the assigned timezone, the door remains unlocked.

 

 

The Green LED on the Reader will Flash

Lock Door

For the duration of the assigned timezone, the door remains locked.

 

The Red LED on the Reader will Flash.

PIN Required

For the duration of the assigned timezone, a valid PIN code must be

 

entered after any card is presented. This overrides any PIN required

 

option that may be set for any group or user.

Any Card

For the duration of the assigned timezone, any card presented will be

 

granted access as long as it contains Track 2 data, even if it would not

 

normally be granted access.

Activate OP2

For the duration of the programmed timezone, the user programmable

 

output OP2 is active.

Activate OP3

For the duration of the programmed timezone, the user programmable

 

output OP3 is active.

Activate AUX

For the duration of the programmed timezone, the 1A auxiliary relay

 

output AUX is active.

PIN Only

For the duration of the programmed timezone, the reader is disabled,

 

and access is granted only by entering a valid PIN.

PIN or Card

For the duration of the programmed timezone, either a valid PIN or a

 

valid Card will allow access.

 

 

 

 

Communications

This menu allows the installer to configure how the controller communicates with externally connected devices or over a network. It is used primarily to configure the communications mode or address of the unit, or to specify log printer options.

Set Address

This option allows the address of the controller to be set when it is operating in a networked system or when directly connected to a PC. The valid address may be from 1 to 255 and corresponds to the number of the controller as configured in ACTWinPro.

Direct Conn.

This option informs the controller that it is connected directly to a controlling PC, rather than via a network interface. In this mode of operation, only a single controller may be connected to the PC via a cable (max 30m) from one of the PC serial ports.

Page 17 of 32

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Page Contents Communications Text Entry Keys Default CodesMenu Navigation Keys AUX output off EnableCard Validity2 User Setup Option DescriptionBatch Cards Assign PINsLearn Group Setup Access RightsOne-To-One Card Validity ACT 2000 OnlyC D E F G H + Full Access ? No Access ? System LogTimezone At all times Door 23---7-AB Auxiliary DoorWiring between Printer & Controller Controller Display LogPrint Log Filter Log ACT 2000 OnlyControl Door User Tracking ACT2000 OnlyTime Zones Clear All ACT2000 OnlySet Date/Time March Wed 1 Mar Holiday Set HolidaysC D E Assign Name ? Clear ? Issue Number Change PINAlarms Operation PIN OnlySecond Door1 Limiting2 One-To-OneTimers Relay Time Ajar TimeLock Door PIN RequiredSystem Settings OperationDisplay PIN LengthOutputs ACT2000 Only Fire DoorsUser Tracking ACT2000 Only Door Settings AlarmsCommunications Timed ActionsAction What Happens Card Setup Card Format Factory DefaultSite Code Typical ACT1000 Configuration Standalone Typical ACT2000 Configuration Standalone DS100 Door Station Installation Always Place Varistor Across Lock TerminalsWiring for Entry/Exit Readers ControllerACT20 PIN Pad Installation Diagram Entry ReaderACT1000/2000 Cable Connections Door Interlock ConfigurationFire Override Configuration ACTWinPro ACTWinPro ConfigurationACT2000 Click here to Connect To PC ACT 4-Line Network WiringTo Mains Supply 12V DC Power Supply 300mA +12V ACT Single Line RS-485 ConverterRS-485 Bus RS-232 ACTWin SoftwareACT Modem Configuration Direct Connection from Modem to ControllerActlan Configuration Diagram ACTWinPro SoftwareACT System Diagram ACTWinPro

ACT1000, ACT2000 specifications

Guardian Technologies, a leader in air purification solutions, offers two standout products in their lineup: the ACT2000 and the ACT1000. Both air purifiers leverage advanced technologies to deliver cleaner, fresher indoor air, making them ideal for families, pet owners, and anyone looking to improve their indoor air quality.

The ACT2000 is designed with a robust filtration system that includes a True HEPA filter capable of capturing 99.97% of airborne particles as small as 0.3 microns. This feature is particularly effective against allergens, dust, mold spores, and pet dander. Additionally, the ACT2000 employs an activated carbon filter that targets and neutralizes odors from cooking, pets, and smoke, ensuring that the air in your home remains fresh and pleasant.

A highlight of the ACT2000 is its innovative UV-C light technology. This feature works synergistically with the filtration system by using ultraviolet light to kill bacteria and viruses present in the air, creating a thorough air purification process. With its coverage of up to 1,250 square feet, the ACT2000 is suited for larger spaces such as living rooms, gyms, or open-concept homes. The device also comes equipped with real-time air quality monitoring, allowing users to track the air quality and adjust settings accordingly.

On the other hand, the ACT1000 is a more compact model, ideal for smaller rooms or offices up to 700 square feet. Similarly, it utilizes a True HEPA filter and an activated carbon filter to purify the air efficiently. While the ACT1000 may be smaller than its counterpart, it does not compromise on performance. The UV-C light technology is included to ensure that airborne pathogens are effectively neutralized.

Both models feature smart controls that allow users to operate the air purifiers remotely. With multiple fan speeds and a whisper-quiet operation, both units can run unobtrusively in the background, even while you’re sleeping or working. An intuitive filter replacement indicator alerts users when it’s time to change the filters, making maintenance simple and straightforward.

In summary, the Guardian Technologies ACT2000 and ACT1000 epitomize modern air purification with their combination of HEPA filtration, activated carbon, UV-C technology, and user-friendly features. Whether you choose the larger capacity of the ACT2000 or the compact efficiency of the ACT1000, both models offer an effective solution for creating a healthier indoor environment.
Top Page Image Contents