Hearth and Home Technologies 21M-ACC warranty Appliance Set-Up

Page 19

 

 

 

R

 

2100 Millennium Wood Stove (ACC)

 

 

 

 

 

 

 

 

 

 

 

 

A.7

Appliance Set-Up

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Door Handle Assembly

B. Adjusting The Blower Speed Control

 

 

 

1.

Install washer on door handle shaft.

The blower speed control for this unit is adjusted at the factory,

and normally does not require further adjustment.

2.

Slide door handle through door.

NOTE: When the speed control is turned clockwise,

3.

Install second washer(s) as shown in Figure 19.1.

 

it will click on to high speed. Continue to turn the

4.

Install key in groove.

 

 

speed control clockwise to decrease the speed. At

5.

Align groove in latch cam with key; slide latch cam

 

full clockwise, the blower should blow gently, but

 

should not stop.

 

 

over shaft

 

 

 

1. With the appliance plugged in, turn the speed

6.

Install locknut but do not overtighten, the handle

 

control knob to slow (full clockwise).

 

 

needs to move smoothly.

 

 

 

2.

With a small screwdriver, adjust the blower speed

7.

Install spring handle turning in a counter-clockwise

 

by turning the adjustment mechanism through the

 

 

motion to required 2 inch (51mm) clearance loca-

 

 

 

 

hole on the side of the speed control.

 

 

tion on door handle rod. Figure 19.1.

 

 

 

3. Adjust the speed so the blower runs slowly, but

 

 

 

 

 

 

 

 

 

 

 

does not stop. Turn clockwise to slow the blower

 

 

 

 

 

 

 

 

 

CAUTION

 

and counterclockwise to increase the speed.

 

 

 

 

 

•Do NOT overtighten lock nut.

•Door handle needs to move smoothly.

 

2 inch (51mm) clearance

 

required from bend in door

 

handle rod to end of spring

 

handle.

 

Door Cross Section

Latch Cam

(example)

Locknut

Spring

Handle

Spacing

Door Handle

Washers

Square Key

 

Figure 19.1

WARNING

HOT. Injury Risk.

•Maintain clearance between bend of door handle rod and spring handle.

•Spring handle will get hot and may cause injury.

September 1, 2008

7039-131F

Page 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents 7039-131F September 1 Hot glass will cause burnsSerial No Model Name Millennium Wood Stove ACCMfg. Date 7039-131F September 1 Table of Contents Mobile Home Approved Appliance Certification BTU & Efficiency SpecificationsGlass Specifications Listing and Code ApprovalsGetting Started Fire SafetyMillennium Wood Stove ACC Negative Pressure Appliance needs to draft properly for safetyInspect Appliance & Components Pre-Use Check List Millennium Wood Stove ACC Flue Draft ConsiderationsVenting Systems Tools And Supplies NeededMasonry Chimney Millennium Wood Stove ACC Typical Stove SystemsAppliance Dimensions Dimensions and ClearancesInstallation USA required Canada recommended InstallationRHearth Protection Requirements See FigureItems Needed for Installation not supplied Millennium Wood Stove ACC Outside Air Kit InstallationFloor Installation Alternative In some instances you Shock Risk Millennium Wood Stove ACC Blower OptionalThimble Chimney ConnectorChimney Requirements Venting Components Chimney SystemsSolid Pack Chimney with Metal Supports as a Thimble ComponentsAir Clearances InstructionsChimney Height / Rise and Run Installing Chimney ComponentsSingle wall connector or stove pipe Solid Pack Chimney with Metal Supports as a Thimble Cont’dRule Millennium Wood Stove ACC Chimney Termination RequirementsPitched Roof Mobile Home Installation Appliance Set-Up Door Handle Assembly Adjusting The Blower Speed ControlWood Selection & Storage Operating InstructionsOver-Firing Your Appliance Wood Selection & Storage Cont’d Burning ProcessAir Controls Automatic Combustion Control ACCBurn Rates and Operating Efficiency Millennium Wood Stove ACC Building a Fire Incorrect Positions Snap Disc Location Initial cold start-up and all Burn SettingsMillennium Wood Stove ACC Blower Operating Instructions Opacity SmokeOdor from appliance Millennium Wood Stove ACC Frequently Asked QuestionsAppliance Maintaining & Servicing Your Appliance General MaintenanceWhen cleaning glass Glass ReplacementMillennium Wood Stove ACC Firebrick Replacement Ceramic Blanket Correct Blanket & Baffle Position onRemoving Tube Channel Assembly Millennium Wood Stove ACC Tube Channel Assembly ReplacementReplacing Tube Channel Assembly Start Fire Problems Possible Cause Solution TroubleshootingExploded Drawings Reference MaterialsSizes Blower Assembly Millennium Wood Stove ACC Service Parts & AccessoriesInch, 2 Nickel Hinge Pins and Nickel Quadra-Fire Logo RIVNUT-REPAIR Date of Service Performed By Description of Service Millennium Wood Stove ACC Service And Maintenance LogMillennium Wood Stove ACC Service And Maintenance Log Cont’d Millennium Wood Stove ACC Homeowner’s Notes Millennium Wood Stove ACC Homeowner’s Notes Cont’d CONDITIONS, Exclusions & Limitation of Liability 4021-645A This page is left blank intentionally Contact Information

21M-ACC specifications

Hearth and Home Technologies' 21M-ACC model represents a significant advancement in the realm of modern home heating solutions. Designed for both aesthetic appeal and functional efficiency, this unit seamlessly integrates contemporary design with advanced technology.

The 21M-ACC is primarily known for its high efficiency, boasting an impressive thermal efficiency rating. This means less fuel is used to produce more heat, thereby reducing energy costs and consumption. One of the standout features is the high-efficiency combustion system that enhances the burning process, ensuring that the maximum amount of fuel is utilized before any emissions are released.

Another key characteristic of the 21M-ACC is its innovative AccuFire technology. This advanced control system allows users to finely adjust the flame height, heat output, and other parameters with precision. This level of customization not only enhances comfort but also contributes to energy savings. The model also features an easy-to-use digital control panel, enabling straightforward adjustments and monitoring of performance.

The design of the 21M-ACC is equally noteworthy. It showcases a sleek and stylish appearance that can complement various home décors, ranging from modern to rustic. The large viewing window provides an unobstructed view of the flames, creating a cozy ambiance while ensuring optimal heat distribution throughout the space.

Safety is paramount in the design of the 21M-ACC. It includes features such as a built-in safety shut-off system and a robust heat shield, which ensures that the exterior remains cool to the touch, making it safe for households with children or pets.

Additionally, this model is compatible with a variety of fuel types, including natural gas and propane, offering versatility for users. Whether utilizing it as a primary heat source or a supplementary feature, the 21M-ACC adapts to individual heating needs and preferences.

In conclusion, Hearth and Home Technologies' 21M-ACC combines efficiency, safety, and design sophistication, making it an exemplary choice for those looking to enhance their living space with a reliable heating solution.
Top Page Image Contents