LG Electronics 3828A20025V Always ground the product, Use the correctly rated breaker or fuse

Page 3

Safety Precautions

Safety Precautions

To prevent injury to the user or other people and property damage, the following instructions must be followed.

Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified by the following indications.

WARNING

This symbol indicates the possibility of death or serious injury.

CAUTION

This symbol indicates the possibility of injury or damage.

Meanings of symbols used in this manual are as shown below.

Be sure not to do.

Be sure to follow the instruction.

WARNING

Installation

Do not use a defective or underrated circuit breaker. Use this appliance on a dedicated circuit.

There is risk of fire or electric shock.

Install the panel and the cover of control box securely.

There is risk of fire or electric shock.

For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service Center.

Do not disassemble or repair the product. There is risk of fire or electric shock.

Always install a dedicated circuit and breaker.

Improper wiring or installation may cause fire or electric shock

Always ground the product.

There is risk of fire or electric shock.

Use the correctly rated breaker or fuse.

There is risk of fire or electric shock.

Installation Manual 3

Image 3
Contents LG Floor Standing Type Air Conditioner Table of Contents Use the correctly rated breaker or fuse Always ground the productOperation Be sure the installation area does not deteriorate with ageUse two or more people to lift and transport the product Keep level even when installing the productSelection of the best location Installation of UnitPiping length and the elevation Indoor Unit Installation Outdoor unit InstallationRefrigerant amount Selecting the locationOutdoor Unit Installation guide at the seasideInstallation works Descriptions Installation MethodInstallation Parts, Tools Use Preparation of installation parts and toolsCut the pipes and the cable Preparation of PipingPrecautions in bending Connection of pipingMove the indoor tubing and drain hose to the hole Connecting the Cable to Indoor Unit Connecting the cables to the outdoor unit Connecting pipings to the outdoor unitPower supply Power Supply and WiringVacuum Drying of the Connecting Pipes and the Indoor Unit Form the Piping Final Check and Test Run Memo Floor Standing type Air Conditioner