LG Electronics 3828A20025V Operation, Be sure the installation area does not deteriorate with age

Page 4

Safety Precautions

Do not modify or extend the power cable.

Be cautious when unpacking and installing the product.

• There is risk of fire or electric shock.

Sharp edges could cause injury. Be especially careful of the case edges and the fins on the condenser and evaporator.

For installation, always contact the dealer or an Authorized Service Center.

Do not install the product on a defective installation stand.

• There is risk of fire, electric shock, explosion, or injury.

• It may cause injury, accident, or damage to the product.

Be sure the installation area does not deteriorate with age.

If the base collapses, the air conditioner could fall with it, causing property damage, product failure, and

personal injury.

Do not let the air conditioner run for a long time when the humidity is very high and a door or a window is left open.

Moisture may condense and wet or damage furniture.

Operation

Do not store or use flammable gas or combustibles near the product.

• There is risk of fire or failure of product.

4Floor Standing type Air Conditioner

Image 4
Contents LG Floor Standing Type Air Conditioner Table of Contents Always ground the product Use the correctly rated breaker or fuseBe sure the installation area does not deteriorate with age OperationKeep level even when installing the product Use two or more people to lift and transport the productInstallation of Unit Selection of the best locationPiping length and the elevation Outdoor unit Installation Indoor Unit InstallationRefrigerant amount Installation guide at the seaside Selecting the locationOutdoor UnitInstallation Method Installation works DescriptionsPreparation of installation parts and tools Installation Parts, Tools UsePreparation of Piping Cut the pipes and the cableConnection of piping Precautions in bendingMove the indoor tubing and drain hose to the hole Connecting the Cable to Indoor Unit Connecting pipings to the outdoor unit Connecting the cables to the outdoor unitPower Supply and Wiring Power supplyVacuum Drying of the Connecting Pipes and the Indoor Unit Form the Piping Final Check and Test Run Memo Floor Standing type Air Conditioner