GET TO KNOW YOUR WATER HEATER
REPLACEMENT PARTS AND DELIMING PRODUCTS
Replacement parts and recommended delimer may be ordered through authorized servicers or distributors. Refer to the Yellow Pages for where to call or contact State Water Heaters, 500 Lindahl Parkway, Ashland City, TN 37015. When ordering parts, provide complete model and serial numbers (see rating plate), quantity and name of part desired (as listed in Figure 1). Standard hardware items may be purchased locally.
(A) | VENT | (O) | INLET DIP TUBE |
(B) | ANODE | (P) | TEMPERATUREAND |
(C) | HOT WATER OUTLET |
| PRESSURE RELIEF VALVE |
(D)OUTLET (115 VAC) (Q) EMBLEM AND RATING PLATE
(E) | FLUE BAFFLE | (R) | INSULATION |
(F) | GAS SUPPLY | (S) | VENT TERMINAL |
(G) | MAIN MANUAL GAS | (T) | DRAIN VALVE |
| SHUT OFF VALVE | (U) | HSI BURNER ASSEMBLY |
(H) | GROUND JOINT UNION | (V) | FLUE |
(J) | DIRT LEG | (W) | DRAIN PAN |
(K) | OUTER DOOR | (X) | GAS VALVE |
(L) | UNION | (Y) | CONTROL HARNESS |
(M) | INLET WATER SHUT | (Z) | INNERDOOR |
| OFF VALVE | (AA) FLOOR DRAIN | |
(N) | COLD WATER INLET | (BB) VENTADAPTER | |
*CAUTION: 115VAC IN CONTROL HARNESS AND INSIDE OUTER DOOR
GAS MODELS
WITH HOT SURFACE IGNITION | FIGURE 1 |
& - 2” OR 3” PVC VENT CAPABILITY |
NATURAL HOT SURFACE IGNITER & MAIN BURNER
HOT
SURFACE
IGNITOR
SENSOR
PROPANE HOT SURFACE IGNITER & MAIN BURNER
HOT
SURFACE
IGNITOR
SENSOR
TEMPERATURE INDICATORS
TEMPERATURE ADJUSTMENT BUTTONS
2