State Industries STC-080 manual Combustion Chamber Temperature Sensor

Page 19

RESIDENTIAL GAS, NON POWER VENTED, WATER HEATER

SERVICE HANDBOOK

If there has been a flammable vapor ignition, a qualified service agent needs to inspect the arrestor for cracks. The arrestor is not a replaceable part – the heater would need to be replaced.

Possible service issues associated with the flame arrestor.

•Poor combustion – yellow flame, sooting, possible carbon monoxide production.

•Pilot outage due to lack of oxygen. Continued pilot outage or finding that the LDO screen(s) is heavily blocked would warrant inspection of the flame arrestor.

•Pilot outage due to increased combustion chamber temperatures below the main burner. This may open the automatic reset, thermal cut off switch (TCO).

•The flame arrestor having contained a flammable vapor ignition. The TCO will open and the chamber and arrestor should be inspected by a qualified service agent.

COMBUSTION CHAMBER TEMPERATURE SENSOR

The C3 Technology water heaters will come equipped with a thermal cutoff (TCO) device that is integral with the thermocouple. Temperature cutoff points range from 160°C to 200°C depending on model. The TCO is an automatic reset thermal switch. When activated it will open the thermocouple circuit and shut off the main and pilot burner gas flow. The pilot would have to be relit after the TCO has had sufficient time to cool down (sensor is below 120 degrees F).

In addition to printing the temperature setting on the TCO, a label located near the gas valve attachment end of the thermocouple notes the temperature setting of the TCO.

The TCO performs two primary functions:

•In the event of flammable vapor ignition inside the combustion chamber, it senses the corresponding increase in temperature and shuts off gas flow to the main and pilot burners.

•If excessive temperatures inside the combustion chamber indicate poor combustion due to a clogged LDO screen or inadequate air for combustion, the TCO will shut off gas flow to the main and pilot burners.

State Water Heater

18

Technical Training Department

© 2004

 

Ashland city, TN

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Standard Residential GAS Water Heaters NON Power Vented ModelsResidential GAS Service Handbook Introduction Table of ContentsMiscellaneous Information Tools RequiredTo convert FormulasConstruction Installation of Residential GAS Water Heater Residental GAS Water Heater Service Residential Gas Normal OperationResidential Gas Degree Burns on Adult Skin Setting Approximate Temperature FBTU Service000 FuelTest If … … thenThermocouple output test Procedures/Conditions Electrical TestingSooting causes If … … then Condensation Safety drop out testProcedures If… … thenCondensation is a mild acid it will corrode steel Flammable Vapor Ignition Resistant Fvir Design Exhaust Venting NotesLDO Screen LINT, DUST, OIL Screens Possible Service issues associated with a blocked screenFlame Arrestor Possible service issues associated with the flame arrestor Combustion Chamber Temperature SensorONE Piece Pilot Burner Assembly Sealed Combustion Chamber To replace a pilot assemblyFive point inner door seal inspection Other features Important Service ReminderPiezo Igniter WHY Water Heater Tanks Leak What Prevention Water Conditions What WHY PreventionEffects GeneralFIX Cause SymptomsIf tank is new with no lime build-up to any degree Aluminum HydroxideTreatment Discolored WaterSmelly Water Procedure Chlorination ProcedureTest Not Enough HOT Water GASThermal Expansion FIX Symptoms General FIX Leaking Temperature and Pressure Relief Valve

STC-080 specifications

The State Industries STC-080 is a high-efficiency water heater designed to meet the demands of residential and light commercial applications. With its strategic engineering and innovative technology, it offers a reliable solution for those seeking comfort, efficiency, and sustainability in water heating.

One of the main features of the STC-080 is its exceptional efficiency rating. It operates with an impressive Energy Factor (EF) that not only reduces energy consumption but also translates into lower utility bills for users. The unit utilizes a streamlined heat exchanger design, optimizing heat transfer and minimizing energy loss. This design ensures that users can enjoy hot water on demand without the worry of excessive energy expenditure.

The STC-080 is equipped with advanced heating technologies, including a dual-flame burner system. This system ensures rapid heating while providing consistent water temperature, which is essential for residential applications where demand can vary throughout the day. The integration of advanced controls also allows for precise temperature adjustments, giving users full control over their hot water supply.

Durability and reliability are key characteristics of the STC-080. Constructed from high-quality materials, it features a heavy-duty steel tank with a glass-lined interior that provides excellent corrosion resistance. This not only enhances the product's longevity but also ensures consistent performance even in challenging water conditions. Additionally, the unit includes an anode rod that further protects against corrosion, extending service life and reducing maintenance needs.

The STC-080 is designed for easy installation, with flexibility that accommodates various plumbing setups. Its compact design allows for placement in tighter spaces, making it an ideal choice for homes where space is at a premium.

Safety is another priority with the STC-080. It includes multiple safety features such as a temperature and pressure relief valve, ensuring safe operation. The unit also complies with stringent industry standards, providing peace of mind to homeowners and businesses alike.

In summary, the State Industries STC-080 is a standout water heating solution that combines efficiency, reliability, and advanced technology. With its robust construction and user-friendly features, it caters to the evolving needs of both residential and light commercial users, making it an excellent investment for those looking to enhance their water heating systems while being conscious of energy usage.
Top Page Image Contents