Multiquip st3020b1 Power Cord/Cable Safety, Control box safety, LiFting saFetY, Grounding Safety

Page 7

Safety Information

NOTICE

„aLWaYs make certain that the voltage supplied to the pump is correct. Always read the pump’s nameplate to determine what the power requirements are.

Power Cord/Cable Safety

danger

„never let power cords or cables lay in water.

„never stand in water while AC power cord is connected to a live power source.

„never use damaged or worn cables or cords. Inspect for cuts in the insulation.

„ never grab or touch a live power cord or cable with wet hands. The possibility exists of electrical shock, electrocution or death.

„Make sure power cables are securely connected to the motor's output receptacles. Incorrect connections may cause electrical shock and damage to the motor.

Control box safety

danger

„aLWaYs have a qualifi ed electrician perform the control box installation. The possibility exists of electrical shock or electrocution.

NOTICE

„aLWaYs mount control box in a vertical position protected from harsh environmental elements.

LiFting saFetY

CaUtion

„When raising or lowering of the pump is required, always attach an adequate rope or lifting device to the correct lifting point (handle) on the pump.

NOTICE

„do not lift machine to unnecessary heights.

„never lift the equipment while the electric motor is running.

Warning

„never attempt to use the power cord as a lifting or lowering device for the pump.

NOTICE

„aLWaYs make certain that proper power or extension cord has been selected for the job. See Cable Selection Chart in this manual.

Grounding Safety

danger

„aLWaYs make sure pump is grounded.

„never use gas piping as an electrical ground.

„aLWaYs make sure that electrical circuits are properly grounded to a suitable earth ground (ground rod) per the National Electrical Code (NEC) and local codes before operating generator. Severe injury or death by electrocution can result from operating an ungrounded motor.

transporting saFetY

NOTICE

„aLWaYs shut down pump before transporting.

„aLWaYs tie down equipment during transport by securing the equipment with rope.

environmentaL saFetY/deCommissioningCE

„do not pour waste or oil directly onto the ground, down a drain or into any water source.

„Contact your country's Department of Public

Works or recycling agency in your area and arrange for proper disposal of any electrical components, waste or oil associated with this equipment.

„When the life cycle of this equipment is over it is recommended that the pump casing and all other metal parts be sent to a recycling center

Metal recycling involves the collection of metal from discarded products and its transformation into raw materials to use in manufacturing a new product.

Recyclers and manufacturers alike promote the process of recycling metal. Using a metal recycling center promotes energy cost savings.

st3020b1/BCUL Sub. pump • operation and parts manual — rev. #2 (10/28/10) — page 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model st3020b1/st3020bcul Submersible Pump Table of ContentsChoose from three easy options SaFetY messages Safety InformationGeneraL saFetY „ do not attempt to thaw out a frozen pump by using PUmp saFetYGrounding Safety Power Cord/Cable SafetyControl box safety LiFting saFetYST3020B1/BCUL Pump Dimensions DimensionsST3020B1/BCUL SpecificationSUL/CSA Pump Performance Curve Performance curveGeneral information Shaft simplifies maintenance„„CORROSION-RESISTANT STAINLESS-STEEL Submersible Pump Components ComponentsDirect Power Operation Direct power operationHow It Works Float switchesMechanical Float Switch Design FeaturesMounting The Float Switches Float SwitchesControl Boxes CB6 and CB200 Float switches control boxSingle Power Input Cable to Control BOX For correct wiring to pump motor 1Ø, 230 VAC, addAttaching Lifting Rope Pump Power Connections No Control BoxOperation Hose ConnectionsControl Box Mounting Control Box InstallationSingle-Phase Power Installation Input Power Cord RequirementsConnecting AC Power to the Pump Motor Connecting Dual float Switch SW-1WOP To Control BoxCB200 Control Box New Style Electronic Overload Module Electronic Overload Module SettingsReset Operation ModuleAutomatic Operation Manual OperationShut-Down Operation/maintenanceCleanup Verify that the control box power on light is OFFRemove impeller nut item 4 and washer item MaintenanceImpeller/Mechanical Seal Replacement Remove adjustment liner item Reassemble in reverse orderWhy perform electrical insulation testing? Electrical Insulation TestingSolution SymptomTB1 Cb6 wiring diagramConnections Cb200 wiring diagramExplanation of Code in Remarks Column To 3 Units Suggested Spare PartsPump assy Part Name QTY Remarks Motor assy Part Name FreigHt poLiCY Terms and Conditions of Sale PartsPage HERE’S HOW to GET Help

st3020bcul, st3020b1 specifications

The Multiquip ST3020B1 and ST3020BCUL are robust and efficient generators designed to meet the power needs of various applications. These models are particularly popular among contractors, events, and emergency services due to their reliability and high performance.

One of the main features of the ST3020B1 is its impressive power output. With a rated capacity of 30 kW, this generator is capable of powering a variety of tools and equipment simultaneously. The ST3020BCUL variant, while also maintaining similar power output, offers additional features that enhance usability and functionality. Both models are equipped with a durable frame and come with advanced noise-reduction technology, making them suitable for use in noise-sensitive environments.

The design of the ST3020B1 and ST3020BCUL emphasizes portability. Both models are fitted with heavy-duty wheels and ergonomic handles, allowing for easy maneuverability across job sites. Their compact design ensures that they occupy minimal space without compromising on performance.

In terms of technology, these generators are powered by a reliable engine that guarantees consistent performance. The advanced fuel consumption management system enhances efficiency, allowing longer operational periods before refueling. Additionally, the generators are designed with user-friendly control panels that provide clear indicators for oil levels, battery voltage, and running status, ensuring easy monitoring during operation.

Safety features are paramount in the design of the ST3020B1 and ST3020BCUL. Both models are equipped with Automatic Low Oil Shutdown systems, preventing engine damage and ensuring longevity. The overload protection mechanism safeguards against potential equipment damage by automatically shutting down the generator when necessary.

Moreover, the ST3020BCUL model goes a step further by integrating additional outputs, including multiple 120V and 240V outlets, catering to diverse power requirements. This versatility makes it ideal for both professional construction environments and recreational applications.

In summary, the Multiquip ST3020B1 and ST3020BCUL generators stand out for their powerful output, portability, user-friendly technology, and safety features. These characteristics make them an essential tool for anyone requiring reliable mobile energy solutions, contributing significantly to enhanced productivity and efficiency in various operational settings.
Top Page Image Contents