Sears 385.1915 owner manual Sew a Button, Thread tension

Sew a Button

13

Thread tension

3_o6

Drop the feed dogs. (see p. 32).

\	1.	Match	the	button		holes	to	the horizontal			slot on
		the presser		foot.
F Satin stlteh	2.	Lower	the	toot	to	hold	the	button	in	place.
	Drop teed lever
foot	3,	Turn	the	hand	wheel		by	hand	until	the	needle

point _s_ust above the button.

4.Press the stitch width button (+ or --}so the needle will enter the left hole of the button,

Draw thread to reverse side ot

tabric

5.Turn the hand wheel so the needle will enter the

right	hole of the button.	Readjust	the stitch
width	if necessary.

6.Stitch several times.

7.After you finish sewing, cut thethread but leave 3 to 4 inches of thread at the button.

8.Draw the thread to the reverse side of the fabric and knot the threads.

When sewing the button =s completed, razse the feed dogs tor normal sewing,