Sears 385.1915 owner manual T40, FO01 F

f

	Set the	Machine
4O	t40
t		FO01 F I

Thread te ns_on 3to7

A: Zigzag foot

or

F Satin stitch toot

===8===========

Twin needte

Additional

spool pro

Turn off and unplug the machine before changing the needle to the

twin needle, Insert the additional spool pin, and put the felt and spool on it with the thread comming off the spool as shown.

Press the twin needle button,

Spool pin

When threading the machine for twin needle sewing follow this chart making sure you separete the threads, plamng one m each thread guide on the sides of the needle bar,

Threading from (_) to (_ is the same as for single thread. Refer to page 21.

®Draw the threads down and slide them through the lower thread guide.

@Slide one of the threads through the needle bar thread guide on the left, and the other one on the r_ght.

®Thread the needle from front to back,

At corners, raise the needle till they c_ear the fabric.

Partially raise the presser foot and carefully pivot the fabric.

When twin needle sewing is completed, change needle and reset tension if necessary.

To return to single needle sewing, press the Twin Needle button or turn off the power switch.

NOTE; To avoid the thread twisting, ]t is advisable to thread the machine one thread at a tlme_

8O