Janome 350E Key position adjustment, Embroidery maximum speed, Sewing light, Auto thread cutter

Page 24

i	Key Position Adjustment			Yes
o	Maximum speed setting			SET
o	650spm	+
		+
!0	Sewing Light
!1	Auto Thread Cutter		ON	OFF
			ON	OFF
	Register
	(A)

Key Position Adjustment

PRESS MARK (+)

(B)

Key Position Adjustment

END

iKey position adjustment

If you think the touch panel keys are out of alignment, you can correct it in the key position adjustment window.

When you press the Yes key, the window (A) will be shown. With your finger, press the Black cross (+) signs as they appear in order. When you press the last Black cross (+) sign, the window (B) will be shown.

oEmbroidery maximum speed

The maximum sewing speed can be changed from 400 to 650 spm for embroidery sewing.

The default setting is 650 spm.

Press the Minus key to reduce the maximum sewing speed.

Press the Plus key to increase the maximum sewing speed.

NOTE:

Reduce the sewing speed when sewing patterns with narrow zigzag stitches that tend to deform at the high speed.

!0 Sewing light

You can turn the sewing light on or off by pressing the Sewing light key.

!1 Auto thread cutter

If the auto thread cutter command is enabled, the

machine will stop and cut the threads automatically when each color section is finished.

Press the ON key to enable auto thread cutter. Press the OFF key to disable auto thread cutter.

Press the next page key to view the next page.

22

Image 24

Contents Instruction Book Important Safety Instructions 25-27 Know Your Machine Names of PartsStandard Accessories Detachable Extension Table For Your Safety Operating InstructionsSetting the spool of thread Winding the BobbinRemoving the bobbin Additional spool pinGuide the thread around the bobbin winder thread Inserting the bobbin Raising the Presser Foot Threading the MachineSlip the thread through the slit and down into Needle Threader Drawing up the Bobbin Thread Adjusting the Thread Tension When the needle thread tension is too tightWhen the needle tension is too loose Balanced thread tensionChanging Needle Embroidery Hoop a Embroidery Hoop BAdhesive Iron-on Stabilizer Types of stabilizerUsage Setting the Fabric in an Embroidery Hoop Attaching the Embroidery Hoop to the Machine Pattern Selection Window Mode Setting Machine Settings Key position adjustment Embroidery maximum speedSewing light Auto thread cutter4Reset all to default 2Thread selection3Formatting the built-in memory 5Register keyLanguage Selection On-screen HelpSelecting Built-in Designs Ready to Sew screen Color section keyNext/Previous section keys Color list keyTrace key 0Carriage store keyScreen Information 5Stitch Back/Forward keysStarting to Sew Embroidery Sewing resultsMonogram Selection Window Selecting the fontsLetter case European lettersNumber/Symbol key Mode key Refer toDelete key Cursor keysExample Bear in Gothic style Multi-color monogrammingBear Orientation of monogrammingLetters Monogram Correcting the Monogram Deleting a letterInserting a letter PC Cards optional item Inserting and ejecting a PC cardEjecting the PC card Selecting the PC card designsUSB Memory optional item Opening the designs on USB memory140x200mm Editing ScreenEditing the Embroidery Designs Moving the selected patternAF 126x110mm Changing the hoop sizeResizing the selected pattern Flipping the patternRotating the selected pattern Deleting the pattern Magnifying the pattern imageSaving a File Creating a new folder Assigning the file nameDeleting the file Creating AN Original Design Apple Cleaning the Hook Race Assemble the hook raceTo remove To replaceProblemCause Reference