Janome 350E manual Winding the Bobbin, Removing the bobbin, Setting the spool of thread

Page 8

	Winding the Bobbin
q	Removing the bobbin
	Slide the hook cover plate release button to the right,
	and remove the hook cover plate. Lift out the bobbin
	from the bobbin holder.

q Hook cover plate release button w Hook cover plate

e Bobbin

w

e

q

Setting the spool of thread

	Place the spool of thread on the spool pin with the
	thread coming off the spool as shown. Attach the large
	spool holder, and press it firmly against the spool of
	thread.
	NOTE:
	Use the small spool holder to hold narrow or small
w	spools of thread.
	q Large spool holder
	w Small spool holder

Additional spool pin

Use the additional spool pin when you need to wind the bobbin without unthreading the machine while working on a sewing project.

r

		Insert the additional spool pin into the spool stand then
	q	into the hole besides the horizontal spool pin.
	q	Place the felt on the spool pin and place a spool of
		Place the felt on the spool pin and place a spool of
	w	thread on it as shown.
	w
		q Additional spool pin
	e	w Spool stand
		e Hole
		r Felt

6

Image 8

Contents Instruction Book Important Safety Instructions 25-27 Know Your Machine Names of PartsStandard Accessories Detachable Extension Table For Your Safety Operating InstructionsSetting the spool of thread Winding the BobbinRemoving the bobbin Additional spool pinGuide the thread around the bobbin winder thread Inserting the bobbin Raising the Presser Foot Threading the MachineSlip the thread through the slit and down into Needle Threader Drawing up the Bobbin Thread Adjusting the Thread Tension When the needle thread tension is too tightWhen the needle tension is too loose Balanced thread tensionChanging Needle Embroidery Hoop a Embroidery Hoop BUsage Adhesive Iron-on StabilizerTypes of stabilizer Setting the Fabric in an Embroidery Hoop Attaching the Embroidery Hoop to the Machine Pattern Selection Window Mode Setting Machine Settings Key position adjustment Embroidery maximum speedSewing light Auto thread cutter4Reset all to default 2Thread selection3Formatting the built-in memory 5Register keyLanguage Selection On-screen HelpSelecting Built-in Designs Ready to Sew screen Color section keyNext/Previous section keys Color list keyTrace key 0Carriage store keyScreen Information 5Stitch Back/Forward keysStarting to Sew Embroidery Sewing resultsMonogram Selection Window Selecting the fontsLetter case European lettersNumber/Symbol key Mode key Refer toDelete key Cursor keysExample Bear in Gothic style Multi-color monogrammingBear Orientation of monogrammingLetters Monogram Inserting a letter Correcting the MonogramDeleting a letter PC Cards optional item Inserting and ejecting a PC cardEjecting the PC card Selecting the PC card designsUSB Memory optional item Opening the designs on USB memory140x200mm Editing ScreenEditing the Embroidery Designs Moving the selected patternAF 126x110mm Changing the hoop sizeRotating the selected pattern Resizing the selected patternFlipping the pattern Deleting the pattern Magnifying the pattern imageSaving a File Creating a new folder Assigning the file nameDeleting the file Creating AN Original Design Apple Cleaning the Hook Race Assemble the hook raceTo remove To replaceProblemCause Reference