Janome 350E manual 2Thread selection, 3Formatting the built-in memory, 4Reset all to default

	Thread selection
!2	Janome AntonRobison- Madeira	Mettler
	Format	SET
	Built-in Memory	Yes
!3	ATA PC Card	Yes
	USB Memory Stick	Yes
	Register

!4	Reset all to defaults
		Yes
		SET
	Register
	!5	!6

!2Thread selection

There are four brands of embroidery threads to choose from. Press the corresponding key of the thread you wish to use. The color code of the selected brand will be shown in the embroidery screen.

!3Formatting the built-in memory

If the internal memory, ATA PC card or USB memory does not function due to damage to the memory bank, you need to re-enable it by formatting the memory.

To format the memory press the Yes Yes key next to the memory location.

NOTE:

Formatting will erase all data stored in the memory.

Press the next page key to view the next page.

!4Reset all to default

Pressing the Yes Yes key will return all settings except for language to defaults (the same settings as when you purchased the machine).

!5Register key

Press this key to register the settings and return to the previous screen.

!6Return key

Press this key to return to the previous screen without registering the settings.

23