Janome 350E manual Bear, Orientation of monogramming

Page 34

b

Ready to Sew

 

 

 

Bear

 

A Z

 

A(F):126 x 110mm

 

 

 

 

 

Mode

Jog

 

 

ST

 

q

 

e

n

 

 

 

bUse the Jog keys to adjust the position of the hoop to match the centerlines.

q Jog keys w Centerlines

NOTE:

You can select one of the 3 placements of the monogramming, left justified, center justified or right justified, by pressing the Justification key.

eJutification key

nLower the presser foot, press the Start/Stop button and sew 5 to 6 stitches.

Press the Start/Stop button again to stop the machine.

Raise the presser foot, cut off the thread tail close to the beginning of the starting point and lower the presser foot.

Press the Start/Stop button to start sewing again and the machine stops sewing automatically when the sewing is finished.

r

w

Orientation of monogramming

You can sew the monogramming in horizontal or vertical orientation.

Press the Horizontal/Vertical key before pressing the OK key to select the orientation.

rMonogramming in horizontal orientation t Monogramming in vertical orientation

t

32

Image 34
Contents Instruction Book Important Safety Instructions 25-27 Know Your Machine Names of PartsStandard Accessories Detachable Extension Table For Your Safety Operating InstructionsRemoving the bobbin Setting the spool of threadWinding the Bobbin Additional spool pinGuide the thread around the bobbin winder thread Inserting the bobbin Raising the Presser Foot Threading the MachineSlip the thread through the slit and down into Needle Threader Drawing up the Bobbin Thread When the needle tension is too loose Adjusting the Thread TensionWhen the needle thread tension is too tight Balanced thread tensionChanging Needle Embroidery Hoop a Embroidery Hoop BTypes of stabilizer Adhesive Iron-on StabilizerUsage Setting the Fabric in an Embroidery Hoop Attaching the Embroidery Hoop to the Machine Pattern Selection Window Mode Setting Machine Settings Sewing light Key position adjustmentEmbroidery maximum speed Auto thread cutter3Formatting the built-in memory 4Reset all to default2Thread selection 5Register keyLanguage Selection On-screen HelpSelecting Built-in Designs Next/Previous section keys Ready to Sew screenColor section key Color list keyScreen Information Trace key0Carriage store key 5Stitch Back/Forward keysStarting to Sew Embroidery Sewing resultsLetter case Monogram Selection WindowSelecting the fonts European lettersDelete key Number/Symbol keyMode key Refer to Cursor keysExample Bear in Gothic style Multi-color monogrammingBear Orientation of monogrammingLetters Monogram Deleting a letter Correcting the MonogramInserting a letter Ejecting the PC card PC Cards optional itemInserting and ejecting a PC card Selecting the PC card designsUSB Memory optional item Opening the designs on USB memory140x200mm Editing ScreenEditing the Embroidery Designs Moving the selected patternAF 126x110mm Changing the hoop sizeFlipping the pattern Resizing the selected patternRotating the selected pattern Deleting the pattern Magnifying the pattern imageSaving a File Creating a new folder Assigning the file nameDeleting the file Creating AN Original Design Apple Cleaning the Hook Race Assemble the hook raceTo remove To replaceProblemCause Reference