Janome 350E manual Embroidery Hoop a, Embroidery Hoop B

Page 17

(A)

e

Embroidery Hoops

(A) Embroidery Hoop A:

q

w

r

(B)e

q

w

r

r

w
	y
e	t
e	q

y

q

This is the standard size hoop, with a 12.6 cm (5”) by 11 cm (4 3/8”) embroidery area for sewing PC Card embroidery designs etc.

(B) Embroidery Hoop B:

This is the large-size hoop, with a 20 cm (8”) by 14 cm (5 1/2”) embroidery area for sewing large-size designs and combined designs.

qOuter hoop w Inner hoop e Attaching knob

r Hoop tightening screw

Templates

When positioning the fabric into the hoop, use the template to align the centerlines on the fabric with the center of the hoop. First mark the centerlines on the fabric and place the fabric on the outer hoop. Place the inner hoop and template over the fabric and adjust the fabric placement.

qStarting point for built-in and PC Card designs w Starting point for monogramming in horizontal

placement

e Starting point for Memory Card No. 102 and up for Memory Craft 5700/9000.

r Starting point for monogramming in vertical placement

t Embroidery boundary for built-in and PC Card designs.

NOTE:

The four indentations on the template do not correspond with reference lines.

yIndentations for positioning the template

15

Image 17

Contents Instruction Book Important Safety Instructions 25-27 Names of Parts Know Your MachineStandard Accessories Detachable Extension Table Operating Instructions For Your SafetyWinding the Bobbin Setting the spool of threadRemoving the bobbin Additional spool pinGuide the thread around the bobbin winder thread Inserting the bobbin Threading the Machine Raising the Presser FootSlip the thread through the slit and down into Needle Threader Drawing up the Bobbin Thread When the needle thread tension is too tight Adjusting the Thread TensionWhen the needle tension is too loose Balanced thread tensionChanging Needle Embroidery Hoop B Embroidery Hoop aUsage Adhesive Iron-on StabilizerTypes of stabilizer Setting the Fabric in an Embroidery Hoop Attaching the Embroidery Hoop to the Machine Pattern Selection Window Mode Setting Machine Settings Embroidery maximum speed Key position adjustmentSewing light Auto thread cutter2Thread selection 4Reset all to default3Formatting the built-in memory 5Register keyOn-screen Help Language SelectionSelecting Built-in Designs Color section key Ready to Sew screenNext/Previous section keys Color list key0Carriage store key Trace keyScreen Information 5Stitch Back/Forward keysSewing results Starting to Sew EmbroiderySelecting the fonts Monogram Selection WindowLetter case European lettersMode key Refer to Number/Symbol keyDelete key Cursor keysMulti-color monogramming Example Bear in Gothic styleOrientation of monogramming BearLetters Monogram Inserting a letter Correcting the MonogramDeleting a letter Inserting and ejecting a PC card PC Cards optional itemEjecting the PC card Selecting the PC card designsOpening the designs on USB memory USB Memory optional itemEditing Screen 140x200mmMoving the selected pattern Editing the Embroidery DesignsChanging the hoop size AF 126x110mmRotating the selected pattern Resizing the selected patternFlipping the pattern Magnifying the pattern image Deleting the patternSaving a File Assigning the file name Creating a new folderDeleting the file Creating AN Original Design Apple Assemble the hook race Cleaning the Hook RaceTo replace To removeReference ProblemCause