Janome 350E manual Starting to Sew Embroidery, Sewing results

Page 30

z	Ready to Sew
		A Z
	Mode	Jog
	Mode	ST
x c		START
		STOP

q

v

START	w
STOP

e

b
‒	+	Mode	Jog
			ST

EMBROIDERY SEWING

Starting to Sew Embroidery

zSelect the desired pattern.

xLower the presser foot, press the Start/Stop button and sew 5 to 6 stitches.

Press the Start/Stop button again to stop the machine.

cRaise the presser foot, cut off the thread tail close to the beginning of the starting point and lower the presser foot.

q Thread tail

vPress the Start/Stop button to start sewing again and the machine stops sewing automatically when the first color section is finished.

The machine will trim the threads automatically if you enabled the auto thread cutting command.

NOTE:

If you disabled auto thread cutting, press the Auto thread cutter button or trim the threads manually.

bAfter finishing embroidery, press the auto thread cutter button to cut the threads.

Press the Carriage store key to return the carriage to the stored position.

w Auto thread cutter button e Carriage store key

r

Sewing results

The embroidery stitch pattern is sewn on the centerlines on the fabric as shown .

rCenterlines on the fabric

NOTES:

The embroidery stitch pattern position against the centerlines is indicated on the template sheets. For embroidery sewing with the PC cards, use the included template sheets to set correct sewing position.

28

Image 30

Contents Instruction Book Important Safety Instructions 25-27 Know Your Machine Names of PartsStandard Accessories Detachable Extension Table For Your Safety Operating InstructionsRemoving the bobbin Setting the spool of threadWinding the Bobbin Additional spool pinGuide the thread around the bobbin winder thread Inserting the bobbin Raising the Presser Foot Threading the MachineSlip the thread through the slit and down into Needle Threader Drawing up the Bobbin Thread When the needle tension is too loose Adjusting the Thread TensionWhen the needle thread tension is too tight Balanced thread tensionChanging Needle Embroidery Hoop a Embroidery Hoop BAdhesive Iron-on Stabilizer Types of stabilizerUsage Setting the Fabric in an Embroidery Hoop Attaching the Embroidery Hoop to the Machine Pattern Selection Window Mode Setting Machine Settings Sewing light Key position adjustmentEmbroidery maximum speed Auto thread cutter3Formatting the built-in memory 4Reset all to default2Thread selection 5Register keyLanguage Selection On-screen HelpSelecting Built-in Designs Next/Previous section keys Ready to Sew screenColor section key Color list keyScreen Information Trace key0Carriage store key 5Stitch Back/Forward keysStarting to Sew Embroidery Sewing resultsLetter case Monogram Selection WindowSelecting the fonts European lettersDelete key Number/Symbol keyMode key Refer to Cursor keysExample Bear in Gothic style Multi-color monogrammingBear Orientation of monogrammingLetters Monogram Correcting the Monogram Deleting a letterInserting a letter Ejecting the PC card PC Cards optional itemInserting and ejecting a PC card Selecting the PC card designsUSB Memory optional item Opening the designs on USB memory140x200mm Editing ScreenEditing the Embroidery Designs Moving the selected patternAF 126x110mm Changing the hoop sizeResizing the selected pattern Flipping the patternRotating the selected pattern Deleting the pattern Magnifying the pattern imageSaving a File Creating a new folder Assigning the file nameDeleting the file Creating AN Original Design Apple Cleaning the Hook Race Assemble the hook raceTo remove To replaceProblemCause Reference