Janome 350E manual Cleaning the Hook Race, Assemble the hook race

Page 49

z

q

we

x

r

c

r t

y

v

u

bi

!1

n

!0 o

m!1

CARE AND MAINTENANCE

Cleaning the Hook Race

WARNING:

Turn the power switch off and unplug the machine before cleaning.

NOTE:

Do not dismantle the machine in any way other than what is explained in this section.

Clean the outside of the machine with a soft cloth and mild soap.

zRemove the setscrews with the screwdriver supplied with the machine. Remove the needle plate.

xLift up the bobbin holder and remove it. q Screwdriver

w Setscrews e Needle plate

cClean the bobbin holder with a lint brush. r Bobbin holder

t Lint brush

vClean the Auto thread cutter mechanism and hook race with the lint brush.

y Auto thread cutter mechanism u Hook race

bClean the hook race with a dry cloth. (You may also use a vacuum cleaner.)

i Dry cloth

Assemble the hook race

nInsert the bobbin holder so that the knob fits next to the stopper in the hook race.

o Knob !0Stopper

mReattach the needle plate, aligning the needle plate guide pins with the guide holes on the needle plate and tighten the screw.

!1Needle plate guide pins

NOTE:

After cleaning the machine, make sure the needle and presser foot are attached.

47

Image 49

Contents Instruction Book Important Safety Instructions 25-27 Names of Parts Know Your MachineStandard Accessories Detachable Extension Table Operating Instructions For Your SafetyWinding the Bobbin Setting the spool of threadRemoving the bobbin Additional spool pinGuide the thread around the bobbin winder thread Inserting the bobbin Threading the Machine Raising the Presser FootSlip the thread through the slit and down into Needle Threader Drawing up the Bobbin Thread When the needle thread tension is too tight Adjusting the Thread TensionWhen the needle tension is too loose Balanced thread tensionChanging Needle Embroidery Hoop B Embroidery Hoop aTypes of stabilizer Adhesive Iron-on StabilizerUsage Setting the Fabric in an Embroidery Hoop Attaching the Embroidery Hoop to the Machine Pattern Selection Window Mode Setting Machine Settings Embroidery maximum speed Key position adjustmentSewing light Auto thread cutter2Thread selection 4Reset all to default3Formatting the built-in memory 5Register keyOn-screen Help Language SelectionSelecting Built-in Designs Color section key Ready to Sew screenNext/Previous section keys Color list key0Carriage store key Trace keyScreen Information 5Stitch Back/Forward keysSewing results Starting to Sew EmbroiderySelecting the fonts Monogram Selection WindowLetter case European lettersMode key Refer to Number/Symbol keyDelete key Cursor keysMulti-color monogramming Example Bear in Gothic styleOrientation of monogramming BearLetters Monogram Deleting a letter Correcting the MonogramInserting a letter Inserting and ejecting a PC card PC Cards optional itemEjecting the PC card Selecting the PC card designsOpening the designs on USB memory USB Memory optional itemEditing Screen 140x200mmMoving the selected pattern Editing the Embroidery DesignsChanging the hoop size AF 126x110mmFlipping the pattern Resizing the selected patternRotating the selected pattern Magnifying the pattern image Deleting the patternSaving a File Assigning the file name Creating a new folderDeleting the file Creating AN Original Design Apple Assemble the hook race Cleaning the Hook RaceTo replace To removeReference ProblemCause