Bernina V29.39.00 manual Software Version, General Changes, Language Finnish integrated

Page 3

Software Version

The Release Note V29.39.00 is in addition to the Release Note V29.21.40 (6/2009).

The newest firmware version for:
Sewing machine	Firmware	Embroidery module
BERNINA 830	V 29.39.00	V 1.00.10
BERNINA 820	V 29.39.00	Not available

1 General Changes

1.1 Language “Finnish” integrated

The following languages are now integrated: Danish, German, English, Spanish, French, Italian, Japanese, Dutch, Russian, Swedish, Turkish and Finnish.

1.2 Display of data version number

In “Setup-Program/Information/Version”, the version of the data is visible. Data contains all sewing and embroidery stitches.

3/14, 04.11.2009

Image 3

Contents Bernina Important points Sewing UpdatesEmbroidery Updates Bernina 830 only Software Version General ChangesDisplay of data version number Software VersionGeneral Changes Language Finnish integratedSewing Updates Thread tension for the underlay segments buttonholesManual threading Use of straight stitch feet with thread cutting Thread cutting without fabric movementManual winding of the lower bobbin thread Reset of back stepping history Winding indicator during sewing/embroideryThread breakage hint Problem with Foot #57D and straight stitch compatibilityInformation Foot #2a corrected Pattern #169 improved Tension changed for the tie on stitchesUpper thread detection changed Start of embroidery Embroidery Updates Bernina 830 onlyUsing zoom option with panning Using Foot #44C The new CutWork & Echo quilting footThread tension can be changed to a minimum Manual tie on for embroidery Stop for manual cutting can be switched offHoop calibration Stitching without thread, is displayed in embroidery modeFeedback issues Important points