Bernina V29.39.00 manual Sewing Updates, Thread tension for the underlay segments buttonholes

Page 4

2 Sewing Updates

2.1 Thread tension for the underlay segments (buttonholes)

To eliminate possible thread loops, the thread tension for segments with short step stitches is inc- reased from 2.0 to 3.0.

2.2 Manual threading

In some cases during manual threading, the thread swing support mechanism can be blocked. This update avoids this issue without performing any mechanical readjustments.

4/14, 04.11.2009

Image 4

Contents Bernina Sewing Updates Embroidery Updates Bernina 830 onlySoftware Version General Changes Important pointsSoftware Version General ChangesLanguage Finnish integrated Display of data version numberThread tension for the underlay segments buttonholes Sewing UpdatesManual threading Thread cutting without fabric movement Use of straight stitch feet with thread cuttingManual winding of the lower bobbin thread Winding indicator during sewing/embroidery Reset of back stepping historyProblem with Foot #57D and straight stitch compatibility Thread breakage hintInformation Foot #2a corrected Tension changed for the tie on stitches Pattern #169 improvedUpper thread detection changed Embroidery Updates Bernina 830 only Using zoom option with panningUsing Foot #44C The new CutWork & Echo quilting foot Start of embroideryThread tension can be changed to a minimum Stop for manual cutting can be switched off Manual tie on for embroideryStitching without thread, is displayed in embroidery mode Feedback issuesImportant points Hoop calibration