Bernina V29.39.00 manual Pattern #169 improved, Tension changed for the tie on stitches

Page 9

2.13 Pattern #169 improved

Elongation limited to a maximum value of two for optimal results.

2.14 Tension changed for the “tie on” stitches

To improve the “tie on” quality with stretchy threads, such as polyester, monofilament etc. the tension setting for the first four stitches is reduced.

2.15 Upper thread detection changed

To prevent an inaccurate warning messages from the upper thread detection, if the thread tensi- on is detected not to be correct the machine now stops after eight stitches.

New:	Before:
Max. Warning Stitches = 8	Max. Warning Stitches = 6

9/14, 04.11.2009

Image 9

Contents Bernina Embroidery Updates Bernina 830 only Sewing UpdatesSoftware Version General Changes Important pointsGeneral Changes Software VersionLanguage Finnish integrated Display of data version numberSewing Updates Thread tension for the underlay segments buttonholesManual threading Use of straight stitch feet with thread cutting Thread cutting without fabric movementManual winding of the lower bobbin thread Reset of back stepping history Winding indicator during sewing/embroideryThread breakage hint Problem with Foot #57D and straight stitch compatibilityInformation Foot #2a corrected Pattern #169 improved Tension changed for the tie on stitchesUpper thread detection changed Using zoom option with panning Embroidery Updates Bernina 830 onlyUsing Foot #44C The new CutWork & Echo quilting foot Start of embroideryThread tension can be changed to a minimum Manual tie on for embroidery Stop for manual cutting can be switched offFeedback issues Stitching without thread, is displayed in embroidery modeImportant points Hoop calibration