Bernina V29.39.00 manual Thread tension can be changed to a minimum

Page 11

3.4 Thread tension can be changed to a minimum of 0.5

A new parameter controls the minimum thread tension range (between 0.0 - 1.0)

In the embroidery mode, the thread tension can be lowered to a minimum level of 0.5, instead of 1.0.

When decreasing the tension values to less than 1 a warning message appears. After confirmation, the minimum tension of 0.5 can be set.

11/14, 04.11.2009

Image 11

Contents Bernina Important points Sewing UpdatesEmbroidery Updates Bernina 830 only Software Version General ChangesDisplay of data version number Software VersionGeneral Changes Language Finnish integratedManual threading Sewing UpdatesThread tension for the underlay segments buttonholes Manual winding of the lower bobbin thread Use of straight stitch feet with thread cuttingThread cutting without fabric movement Reset of back stepping history Winding indicator during sewing/embroideryThread breakage hint Problem with Foot #57D and straight stitch compatibility Information Foot #2a corrected Upper thread detection changed Pattern #169 improvedTension changed for the tie on stitches Start of embroidery Embroidery Updates Bernina 830 onlyUsing zoom option with panning Using Foot #44C The new CutWork & Echo quilting footThread tension can be changed to a minimum Manual tie on for embroidery Stop for manual cutting can be switched offHoop calibration Stitching without thread, is displayed in embroidery modeFeedback issues Important points