Bernina V29.39.00 manual Information Foot #2a corrected

Page 8

2.11Presser Foot #0 can be used for automatic threading. With the “Walking foot” automatic threading is not possible

The original help text mentioned that the machine cannot be threaded automatically with foot attached. New help text implemented:

2.12 Information Foot #2a corrected

Data correction of the dimensions of the presser foot sole.

8/14, 04.11.2009

Image 8

Contents Bernina Sewing Updates Embroidery Updates Bernina 830 onlySoftware Version General Changes Important pointsSoftware Version General ChangesLanguage Finnish integrated Display of data version numberManual threading Sewing UpdatesThread tension for the underlay segments buttonholes Manual winding of the lower bobbin thread Use of straight stitch feet with thread cuttingThread cutting without fabric movement Winding indicator during sewing/embroidery Reset of back stepping historyProblem with Foot #57D and straight stitch compatibility Thread breakage hintInformation Foot #2a corrected Upper thread detection changed Pattern #169 improvedTension changed for the tie on stitches Embroidery Updates Bernina 830 only Using zoom option with panningUsing Foot #44C The new CutWork & Echo quilting foot Start of embroideryThread tension can be changed to a minimum Stop for manual cutting can be switched off Manual tie on for embroideryStitching without thread, is displayed in embroidery mode Feedback issuesImportant points Hoop calibration