3D Connexion 7318 instruction manual Inserting the bobbin

Page 12

	Inserting the bobbin
	q
z	z Place the bobbin in the bobbin holder with the
	thread running off as illustrated.
	q Thread

x	x Guide the thread into the front notch on the
	front side of the bobbin holder. Draw the
	thread to the left, sliding it between the
	tension spring blades.
	w Front notch
	e Tension spring blade

w

e

c

c Continue to draw the thread lightly until the thread slips into the side notch.

r Side notch

r

v

	v Pull out about 4˝ (10 cm) of thread. Attach the
	hook cover plate. Check the threading by
	referring to the chart shown on the hook cover
	plate.
	t Thread
t	y Hook cover plate
t

y

10

Image 12

Contents Page Important Safety Instructions Table of Contents Know Your Machine Names of PartsStandard Accessories Accessory storageExtension Table To detachConnecting the Power Supply Operating InstructionsFree-arm sewing Controlling the Sewing Speed Reverse Stitch LeverDropping the Feed Dog Foot controlRaising and Lowering the Presser Foot Changing the Presser FootRemoving and Attaching the Foot Holder To remove Needle and Thread Chart Changing NeedlesSetting the spool Winding the BobbinAdditional spool pin Removing the bobbinWinding the bobbin Inserting the bobbin Threading the Machine To set the needle threadDrawing up the Bobbin Thread Selecting the Stitch Pattern Pattern Selector DialStitch Length Dial Adjusting stretch stitch balance Stitch Width DialVariable needle position Balancing Needle Thread Tension Balanced tensionNeedle thread tension is too tight Needle thread tension is too looseMachine setting Straight Stitch SewingStarting to sew Changing the sewing directionSeam guides on the needle plate Turning a square cornerBasic Zigzag Machine setting Overcasting Machine settingKnit Stitch Tricot Stitch Multiple Zigzag StitchStraight Stretch Stitch Zigzag Stretch StitchButton Sewing To adjust buttonhole stitch density Step ButtonholeCorded Buttonhole Zipper Application Attaching the zipper footFabric preparation To sew Raise and release the foot, and re-attach it Blind Hemming Decorative Satin Stitches Decorative Stretch StitchesSmocking StepPin Tucking Shell TuckingFagoting PatchworkCare Maintenance Replacing the Bobbin Holder Replacing the Light BulbTroubleshooting Condition Cause Reference Breaks