3D Connexion 7318 Selecting the Stitch Pattern, Pattern Selector Dial, Stitch Length Dial

Page 15

e

w

q

Selecting the Stitch Pattern

Raise the needle to its highest position.

Pattern Selector Dial

Turn the pattern selector dial to set the symbol of the desired stitch pattern at the setting mark.

qPattern selector dial w Setting mark

CAUTION:

Do not turn the pattern selector dial while the needle is in the fabric, otherwise the needle may bend or break.

To select the stretch stitch patterns, set the stitch length dial at S.S.

eStretch stitch patterns

Stitch Length Dial

r

Turn the stitch length dial to set the desired stitch length number at the setting mark.

The higher the number, the longer the stitch

The “ ” mark shows the adjustment range when sewing the buttonhole.

r Setting mark

t Stitch length dial

t

13

Image 15

Contents Page Important Safety Instructions Table of Contents Names of Parts Know Your MachineTo detach Standard AccessoriesAccessory storage Extension TableConnecting the Power Supply Operating InstructionsFree-arm sewing Foot control Controlling the Sewing SpeedReverse Stitch Lever Dropping the Feed DogTo remove Raising and Lowering the Presser FootChanging the Presser Foot Removing and Attaching the Foot HolderChanging Needles Needle and Thread ChartRemoving the bobbin Setting the spoolWinding the Bobbin Additional spool pinWinding the bobbin Inserting the bobbin To set the needle thread Threading the MachineDrawing up the Bobbin Thread Selecting the Stitch Pattern Pattern Selector DialStitch Length Dial Adjusting stretch stitch balance Stitch Width DialVariable needle position Needle thread tension is too loose Balancing Needle Thread TensionBalanced tension Needle thread tension is too tightChanging the sewing direction Machine settingStraight Stitch Sewing Starting to sewTurning a square corner Seam guides on the needle plateOvercasting Machine setting Basic Zigzag Machine settingTricot Stitch Multiple Zigzag Stitch Knit StitchZigzag Stretch Stitch Straight Stretch StitchButton Sewing Step Buttonhole To adjust buttonhole stitch densityCorded Buttonhole Zipper Application Attaching the zipper footFabric preparation To sew Raise and release the foot, and re-attach it Blind Hemming Decorative Stretch Stitches Decorative Satin StitchesStep SmockingShell Tucking Pin TuckingPatchwork FagotingCare Maintenance Replacing the Light Bulb Replacing the Bobbin HolderBreaks Troubleshooting Condition Cause Reference