3D Connexion 7318 instruction manual Fagoting, Patchwork

Page 33

q

r

Fagoting

w

 

e

Machine setting

 

 

q Stitch pattern:

H

 

 

 

 

w Stitch width:

3 – 5

t

 

e Stitch length:

1 – 3

 

r Thread tension:

1 – 4

 

 

 

 

t Presser foot:

Zigzag foot A

 

 

 

 

 

 

Use this stitch to join two pieces of fabric to create an open work appearance, and add design interest.

Fold under each fabric edge 1/2˝ (1.3 cm) and press.

Pin the two edges to a piece of paper or tear- away backing 1/8˝ (0.3 cm) apart.

qPaper

Sew slowly, guiding the fabric so the needle

qcatches the folded edge on each side.

Tear away the backing after sewing is finished.

q

r

Patchwork

w

eMachine setting

 

q Stitch pattern:

D

 

w Stitch width:

5

t

e Stitch length:

1 – 3

r Thread tension:

1 – 4

 

 

t Presser foot:

Zigzag foot A

 

 

 

 

Place two layers of the fabric with the right side together. Seam along the edges with the straight stitch.

Open fabrics flat and fold each seam allowances.

q

q

Place the fabric under the foot so that the seam

 

 

 

 

line matches the center of the foot width.

 

 

Lower the foot and sew the pattern along the

 

 

seam line.

 

 

q Right side of the fabric

31

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Page Important Safety Instructions Table of Contents Names of Parts Know Your MachineAccessory storage Standard AccessoriesExtension Table To detachConnecting the Power Supply Operating InstructionsFree-arm sewing Reverse Stitch Lever Controlling the Sewing SpeedDropping the Feed Dog Foot controlChanging the Presser Foot Raising and Lowering the Presser FootRemoving and Attaching the Foot Holder To removeChanging Needles Needle and Thread ChartWinding the Bobbin Setting the spoolAdditional spool pin Removing the bobbinWinding the bobbin Inserting the bobbin To set the needle thread Threading the MachineDrawing up the Bobbin Thread Selecting the Stitch Pattern Pattern Selector DialStitch Length Dial Adjusting stretch stitch balance Stitch Width DialVariable needle position Balanced tension Balancing Needle Thread TensionNeedle thread tension is too tight Needle thread tension is too looseStraight Stitch Sewing Machine settingStarting to sew Changing the sewing directionTurning a square corner Seam guides on the needle plateOvercasting Machine setting Basic Zigzag Machine settingTricot Stitch Multiple Zigzag Stitch Knit StitchZigzag Stretch Stitch Straight Stretch StitchButton Sewing Step Buttonhole To adjust buttonhole stitch densityCorded Buttonhole Zipper Application Attaching the zipper footFabric preparation To sew Raise and release the foot, and re-attach it Blind Hemming Decorative Stretch Stitches Decorative Satin StitchesStep SmockingShell Tucking Pin TuckingPatchwork FagotingCare Maintenance Replacing the Light Bulb Replacing the Bobbin HolderBreaks Troubleshooting Condition Cause Reference

7318 specifications

The 3D Connexion 7318 is a cutting-edge input device designed specifically for professionals in 3D design and modeling. This innovative product offers a new level of control and precision, making it an essential tool for architects, engineers, and designers. Its advanced technology is tailored to enhance the creative process, allowing users to navigate complex 3D environments with ease.

One of the most notable features of the 3D Connexion 7318 is its intuitive six degrees of freedom (6DoF) functionality. This allows users to move, zoom, and rotate their 3D models in real time, providing a fluid and natural interaction within design software. The device's advanced sensor technology detects the slightest movements, ensuring precision and accuracy with minimal effort. Whether tilting, rotating, or panning, users can maneuver their designs effortlessly, enhancing productivity and creativity.

The 3D Connexion 7318 also incorporates customizable buttons that can be programmed to perform specific functions, providing tailored shortcuts for various software applications. This feature allows users to streamline their workflow, leading to improved efficiency while working on intricate designs. The ergonomic design of the device ensures comfort during prolonged use, with a thoughtful layout that reduces strain on the wrist and fingers.

Moreover, the device is compatible with a wide range of professional 3D applications, including popular software such as AutoCAD, SolidWorks, Autodesk 3ds Max, and more. This extensive compatibility makes the 3D Connexion 7318 a versatile tool that integrates seamlessly into any designer’s toolkit. Additionally, it boasts an impressive build quality, featuring durable materials that ensure longevity even in demanding environments.

In conclusion, the 3D Connexion 7318 stands out as a powerful and efficient tool for professionals in 3D modeling and design. With its advanced 6DoF navigation, customizable controls, and ergonomic design, it enhances the creative process while offering precision and comfort. Whether in an architectural firm or an engineering office, the 3D Connexion 7318 is an invaluable asset for any design professional looking to elevate their work to new dimensions.
Top Page Image Contents