3D Connexion 7318 instruction manual Balancing Needle Thread Tension, Balanced tension

Page 17

Balancing Needle Thread Tension

The thread tension should be adjusted depending

qon the sewing materials, layers of fabric and sewing method.

To adjust the thread tension, turn the tension dial. q Tension dial

wt

Balanced tension:

r

 

 

The ideal straight stitch has threads locked

 

 

between two layers of fabric, as illustrated.

e

 

For an ideal zigzag stitch, the bobbin thread does

w

not show on the right side (top side) of the fabric,

 

 

 

and the needle thread shows slightly on the

 

 

wrong side (bottom side) of the fabric.

 

 

w Needle thread (Top thread)

 

 

e Bobbin thread (Bottom thread)

 

 

r Right side (Top side) of fabric

 

 

t Wrong side (Bottom side) of fabric

 

 

Needle thread tension is too tight:

 

 

The bobbin thread (bottom thread) will appear on

 

 

the right side (top side) of the fabric.

 

 

Loosen the needle thread tension by moving the

 

 

dial to a lower number.

Needle thread tension is too loose:

The needle thread (top thread) will form loops on the wrong side (bottom side) of the fabric. Tighten the needle thread tension by moving the dial to a higher number.

15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Page Important Safety Instructions Table of Contents Names of Parts Know Your MachineAccessory storage Standard AccessoriesExtension Table To detachFree-arm sewing Connecting the Power SupplyOperating Instructions Reverse Stitch Lever Controlling the Sewing SpeedDropping the Feed Dog Foot controlChanging the Presser Foot Raising and Lowering the Presser FootRemoving and Attaching the Foot Holder To removeChanging Needles Needle and Thread ChartWinding the Bobbin Setting the spoolAdditional spool pin Removing the bobbinWinding the bobbin Inserting the bobbin To set the needle thread Threading the MachineDrawing up the Bobbin Thread Stitch Length Dial Selecting the Stitch PatternPattern Selector Dial Variable needle position Adjusting stretch stitch balanceStitch Width Dial Balanced tension Balancing Needle Thread TensionNeedle thread tension is too tight Needle thread tension is too looseStraight Stitch Sewing Machine settingStarting to sew Changing the sewing directionTurning a square corner Seam guides on the needle plateOvercasting Machine setting Basic Zigzag Machine settingTricot Stitch Multiple Zigzag Stitch Knit StitchZigzag Stretch Stitch Straight Stretch StitchButton Sewing Step Buttonhole To adjust buttonhole stitch densityCorded Buttonhole Fabric preparation Zipper ApplicationAttaching the zipper foot To sew Raise and release the foot, and re-attach it Blind Hemming Decorative Stretch Stitches Decorative Satin StitchesStep SmockingShell Tucking Pin TuckingPatchwork FagotingCare Maintenance Replacing the Light Bulb Replacing the Bobbin HolderBreaks Troubleshooting Condition Cause Reference

7318 specifications

The 3D Connexion 7318 is a cutting-edge input device designed specifically for professionals in 3D design and modeling. This innovative product offers a new level of control and precision, making it an essential tool for architects, engineers, and designers. Its advanced technology is tailored to enhance the creative process, allowing users to navigate complex 3D environments with ease.

One of the most notable features of the 3D Connexion 7318 is its intuitive six degrees of freedom (6DoF) functionality. This allows users to move, zoom, and rotate their 3D models in real time, providing a fluid and natural interaction within design software. The device's advanced sensor technology detects the slightest movements, ensuring precision and accuracy with minimal effort. Whether tilting, rotating, or panning, users can maneuver their designs effortlessly, enhancing productivity and creativity.

The 3D Connexion 7318 also incorporates customizable buttons that can be programmed to perform specific functions, providing tailored shortcuts for various software applications. This feature allows users to streamline their workflow, leading to improved efficiency while working on intricate designs. The ergonomic design of the device ensures comfort during prolonged use, with a thoughtful layout that reduces strain on the wrist and fingers.

Moreover, the device is compatible with a wide range of professional 3D applications, including popular software such as AutoCAD, SolidWorks, Autodesk 3ds Max, and more. This extensive compatibility makes the 3D Connexion 7318 a versatile tool that integrates seamlessly into any designer’s toolkit. Additionally, it boasts an impressive build quality, featuring durable materials that ensure longevity even in demanding environments.

In conclusion, the 3D Connexion 7318 stands out as a powerful and efficient tool for professionals in 3D modeling and design. With its advanced 6DoF navigation, customizable controls, and ergonomic design, it enhances the creative process while offering precision and comfort. Whether in an architectural firm or an engineering office, the 3D Connexion 7318 is an invaluable asset for any design professional looking to elevate their work to new dimensions.
Top Page Image Contents