3D Connexion 7318 Straight Stitch Sewing, Machine setting, Starting to sew, Finishing sewing

Page 18

r

w

e

SECTION 3. BASIC SEWING

Straight Stitch Sewing

 

 

 

 

Machine setting:

 

 

 

q Stitch pattern:

A

t

 

w Stitch width:

0 or 5

 

e Stitch length:

1.5 – 4

 

 

 

 

r Thread tension: 2 – 6

 

 

t Presser foot:

Zigzag foot A

 

 

Starting to sew

 

 

 

Raise the presser foot and place the fabric under

 

 

the foot.

 

 

 

Lower the needle into the fabric.

 

 

Lower the presser foot and smooth the threads

 

 

toward the back. Depress the foot control.

 

 

NOTES:

 

 

 

Draw the threads to the left when sewing with the

 

 

buttonhole foot.

 

 

 

To fasten the beginning of the seam, first sew

 

 

several stitches in reverse then sew forward.

 

 

Changing the sewing direction

 

 

Stop the machine and turn the handwheel toward

 

 

you to bring the needle down into the fabric.

 

 

Raise the presser foot.

 

 

Pivot the fabric around the needle to change

 

 

sewing direction as desired. Lower the presser

 

 

foot and continue sewing in the new direction.

Finishing sewing

Press the reverse stitch lever and sew several stitches in reverse at the end of the seam.

Raise the presser foot and remove the fabric, drawing the threads to the back.

q

Draw the threads up and into the thread cutter. The threads are cut the proper length for starting the next seam.

q Thread cutter

16

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Page Important Safety Instructions Table of Contents Know Your Machine Names of PartsExtension Table Standard AccessoriesAccessory storage To detachConnecting the Power Supply Operating InstructionsFree-arm sewing Dropping the Feed Dog Controlling the Sewing SpeedReverse Stitch Lever Foot controlRemoving and Attaching the Foot Holder Raising and Lowering the Presser FootChanging the Presser Foot To removeNeedle and Thread Chart Changing NeedlesAdditional spool pin Setting the spoolWinding the Bobbin Removing the bobbinWinding the bobbin Inserting the bobbin Threading the Machine To set the needle threadDrawing up the Bobbin Thread Selecting the Stitch Pattern Pattern Selector DialStitch Length Dial Adjusting stretch stitch balance Stitch Width DialVariable needle position Needle thread tension is too tight Balancing Needle Thread TensionBalanced tension Needle thread tension is too looseStarting to sew Machine settingStraight Stitch Sewing Changing the sewing directionSeam guides on the needle plate Turning a square cornerBasic Zigzag Machine setting Overcasting Machine settingKnit Stitch Tricot Stitch Multiple Zigzag StitchStraight Stretch Stitch Zigzag Stretch StitchButton Sewing To adjust buttonhole stitch density Step ButtonholeCorded Buttonhole Zipper Application Attaching the zipper footFabric preparation To sew Raise and release the foot, and re-attach it Blind Hemming Decorative Satin Stitches Decorative Stretch StitchesSmocking StepPin Tucking Shell TuckingFagoting PatchworkCare Maintenance Replacing the Bobbin Holder Replacing the Light BulbTroubleshooting Condition Cause Reference Breaks

7318 specifications

The 3D Connexion 7318 is a cutting-edge input device designed specifically for professionals in 3D design and modeling. This innovative product offers a new level of control and precision, making it an essential tool for architects, engineers, and designers. Its advanced technology is tailored to enhance the creative process, allowing users to navigate complex 3D environments with ease.

One of the most notable features of the 3D Connexion 7318 is its intuitive six degrees of freedom (6DoF) functionality. This allows users to move, zoom, and rotate their 3D models in real time, providing a fluid and natural interaction within design software. The device's advanced sensor technology detects the slightest movements, ensuring precision and accuracy with minimal effort. Whether tilting, rotating, or panning, users can maneuver their designs effortlessly, enhancing productivity and creativity.

The 3D Connexion 7318 also incorporates customizable buttons that can be programmed to perform specific functions, providing tailored shortcuts for various software applications. This feature allows users to streamline their workflow, leading to improved efficiency while working on intricate designs. The ergonomic design of the device ensures comfort during prolonged use, with a thoughtful layout that reduces strain on the wrist and fingers.

Moreover, the device is compatible with a wide range of professional 3D applications, including popular software such as AutoCAD, SolidWorks, Autodesk 3ds Max, and more. This extensive compatibility makes the 3D Connexion 7318 a versatile tool that integrates seamlessly into any designer’s toolkit. Additionally, it boasts an impressive build quality, featuring durable materials that ensure longevity even in demanding environments.

In conclusion, the 3D Connexion 7318 stands out as a powerful and efficient tool for professionals in 3D modeling and design. With its advanced 6DoF navigation, customizable controls, and ergonomic design, it enhances the creative process while offering precision and comfort. Whether in an architectural firm or an engineering office, the 3D Connexion 7318 is an invaluable asset for any design professional looking to elevate their work to new dimensions.
Top Page Image Contents