Desa S26PTA, S26NTA installation manual Installing Logs, Pressure Testing Heater Gas Connections

Page 11

Installation

Continued

2.

Pressurize supply piping system by either

 

opening propane/LP supply tank valve for

 

propane/LP gas, opening main gas valve

 

located on or near gas meter for natural gas

 

or using compressed air.

3.

Check all joints from gas meter to equipment

 

shutoff valve (see Figures 9 and 10). Apply

 

noncorrosive leak detection fluid to gas joints.

 

Bubbles forming show a leak.

Equipment

Shutoff

Valve

Gas Meter

Control Valve

Location

4. Correct all leaks at once.

Pressure Testing Heater Gas

Connections

1. Open equipment shutoff valve (see Figure 8).

2. Open main gas valve located on or near gas meter for natural gas or open propane/LP supply tank valve for propane/LP gas.

3. Make sure control knob of heater is in the OFF position.

4. Check all joints from equipment shutoff valve to control valve (see Figures 9 and 10). Apply noncorrosive leak detection fluid to gas joints. Bubbles forming show a leak.

5. Correct all leaks at once.

6. Light heater (see Operating Heater, page 14). Check all other internal joints for leaks.

7. Turn off heater (see To Turn Off Gas to Appli- ance, page 15).

Equipment

 

Open

 

Shutoff Valve

 

 

Closed

Figure 8- Equipment Shutoff Valve

Equipment Shutoff Valve

Figure 10 - Checking Gas Joints

INSTALLING LOGS

WARNING:Failuretoposition thepartsinaccordancewiththese diagrams or failure to use only parts specifically approved with this heater may result in property damage or personal injury.

CAUTION: After installa- tion and periodically thereafter, check to ensure that no flame comes in contact with any log. WiththeheatersettoHigh,check to see if flames contact any log. If so, reposition logs according to the log installation instructions in this manual. Flames contact- ing logs will create soot.

It is very important to install the logs exactly as instructed. Do not modify logs. Only use logs supplied with heater.

Place one-piece log set on grate to fit as illustrated in Figure 11. Make sure log sits flat on firebox floor (see Figure 11).

Propane/LP Supply Tank

Control Valve

Location

One Piece

Log Set

Firebox

Floor

Figure 9 - Checking Gas Joints

Figure 11 - Installing One-Piece Log Set

110361-01G

www.desatech.com

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents What to do if YOU Smell GAS Safety Information Table of ContentsPoisoning may lead to death Safety InformationVent-Free Freestanding Pedestal Stove Product IdentificationAir For Combustion Ventilation Product FeaturesLocal Codes UnpackingDetermining if You Have a Confined or Unconfined Space AIR for Combustion VentilationDetermining FRESH-AIR Flow for heater Location Confined and Unconfined SpaceVentilation Air From Outdoors InstallationVentilation AIR Ventilation Air From Inside BuildingMinimum Wall and Ceiling Clearances See Figure Check GAS TypeClearances to Combustibles Installation Items Needed Connecting to GAS SupplyTest Pressures Equal To or Less Than Psig 3.5 kPa Checking GAS ConnectionsPropane/LP NaturalPressure Testing Heater Gas Connections Installing LogsInstalling One-Piece Log set Top View Installing Blower Accessory GA3750Installing Blower Control Housing Lighting Instructions For Your Safety Read Before LightingOperating Heater Inspecting Burners Operating HeaterBurner Injector Holder and Pilot Air Inlet Hole Cleaning MaintenanceSpecifications Cleaning MaintenanceService Hints Technical ServiceObserved Problem Possible Cause Remedy TroubleshootingMaintenance Cleaning Statement above Gas leak. See WarningModels S26PTA and s26nta Shown Illustrated Parts BreakdownParts List Models S26PTA and s26Nta Illustrated Parts BreakdownParts List Equipment Shutoff Valve GA5010 Replacement PartsAccessories Cleaning KIT CCKParts Central Limited Warranty VENT-FREE GAS Pedestal Stove Warranty InformationKeep this Warranty

S26PTA, S26NTA specifications

Desa S26PTA and S26NTA represent the forefront of agricultural technology, offering robust solutions tailored for modern farming needs. These innovative systems cater specifically to agricultural producers looking to enhance efficiency, streamline operations, and improve yields.

One of the main features of Desa S26PTA is its advanced precision agriculture capabilities. Equipped with state-of-the-art GPS technology, it enables farmers to accurately map their fields, monitor crop health, and apply inputs like fertilizers and pesticides with pinpoint accuracy. This not only conserves resources but also minimizes environmental impact, leading to more sustainable farming practices. Additionally, the S26PTA offers real-time data analytics that helps farmers make informed decisions based on current field conditions.

On the other hand, the S26NTA focuses on nutrient management, delivering a comprehensive solution for soil health. Its integrated sensor technology allows for continuous monitoring of soil conditions, assessing moisture levels, pH, and nutrient content. Farmers can access this data through a user-friendly interface, empowering them to optimize their soil management strategies. By fostering healthier soils, the S26NTA contributes to stronger crop development and increased productivity.

Both the S26PTA and S26NTA leverage Internet of Things (IoT) technologies, connecting various sensors and agricultural equipment. This technological integration provides a holistic view of farming operations, ensuring that farmers can monitor and control their systems remotely. The ability to receive alerts and notifications regarding equipment performance or potential issues is invaluable for proactive management.

Moreover, these systems are designed to be user-friendly, with intuitive interfaces that cater to farmers of all tech-savvy levels. Training and support are also integral parts of the package, ensuring that users can maximize the potential of these advanced technologies.

In conclusion, Desa S26PTA and S26NTA exemplify the evolution of agriculture through technology. Their focus on precision farming, nutrient management, and IoT integration offers powerful tools that enhance productivity and sustainability. As the agricultural sector continues to embrace digital transformation, solutions like these will play a crucial role in shaping the future of farming. Farmers adopting these technologies can look forward to optimized operations, improved crop yields, and a positive environmental impact.
Top Page Image Contents