Desa S26NTA, S26PTA Product Identification, Vent-Free Freestanding Pedestal Stove

Page 4

SAFETY INFORMATION

Continued

1.This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible for use with other gases.

2.Do not place propane/LP supply tank(s) in- side any structure. Locate propane/LP supply tank(s) outdoors (propane/LP gas units only).

3.If you smell gas

shut off gas supply

do not try to light any appliance

do not touch any electrical switch; do not use any phone in your building

immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions

if you cannot reach your gas supplier, call the fire department

4.This heater shall not be installed in a bedroom or bathroom.

5.Do not use this heater as a wood-burning heater. Use only the logs provided with the heater.

6.Do not add extra logs or ornaments such as pine cones, vermiculite or rock wool. Using these added items can cause sooting. Do not add lava rock around base. Rock and debris could fall into the control area of heater. After servicing, always replace screen before operating heater.

7.You must operate this heater with the heater screen in place. Make sure heater screen is in place before running heater.

8.This heater is designed to be smokeless. If logs ever appear to smoke, turn off heater and call a qualified service person. Note: During initial operation, slight smoking could occur due to log curing and heater burning manufacturing residues.

9.To prevent the creation of soot, follow the instructions in Cleaning and Maintenance, page 16.

10.Before using furniture polish, wax, carpet cleaner or similar products, turn heater off. If heated, the vapors from these products may create a white powder residue within burner box or on adjacent walls or furniture.

11.This heater needs fresh air ventilation to run properly. This heater has an Oxygen Depletion Sensing (ODS) safety shutoff system. The ODS shuts down the heater if not enough fresh air is available. See Air for Combustion and Ventilation, page 5. If heater keeps shutting off, see Troubleshooting, page 18.

12.Keep all air openings in front and bottom of heater clear and free of debris. This will insure enough air for proper combustion.

13.Do not run heater

where flammable liquids or vapors are used or stored.

under dusty conditions.

14.Do not use this heater to cook food or burn paper or other objects.

15.Do not use heater if any part has been under water. Immediately call a qualified service technician to inspect the room heater and to replace any part of the control system and any gas control which has been under water.

16.Turn off and unplug heater and let cool before servicing. Only a qualified service person should service and repair heater.

17.Operating heater above elevations of 4,500 feet could cause pilot outage.

18.Do not operate heater if any log is broken. Do not operate heater if a log is chipped (dime- sized or larger).

19.To prevent performance problems with pro- pane/LP units, do not use propane/LP fuel tank of less than 100 lb. capacity.

20.Provide adequate clearances around air openings.

Product

Identification

Stove

Cabinet

Screen

Logs

Heater Controls

(Inside Door)

Figure 1 - Vent-Free Freestanding

Pedestal Stove

www.desatech.com110361-01G

Image 4
Contents What to do if YOU Smell GAS Table of Contents Safety InformationSafety Information Poisoning may lead to deathProduct Identification Vent-Free Freestanding Pedestal StoveProduct Features Local CodesUnpacking Air For Combustion VentilationAIR for Combustion Ventilation Determining FRESH-AIR Flow for heater LocationConfined and Unconfined Space Determining if You Have a Confined or Unconfined SpaceInstallation Ventilation AIRVentilation Air From Inside Building Ventilation Air From OutdoorsClearances to Combustibles Check GAS TypeMinimum Wall and Ceiling Clearances See Figure Connecting to GAS Supply Installation Items NeededChecking GAS Connections Propane/LPNatural Test Pressures Equal To or Less Than Psig 3.5 kPaInstalling Logs Pressure Testing Heater Gas ConnectionsInstalling Blower Accessory GA3750 Installing One-Piece Log set Top ViewInstalling Blower Control Housing Operating Heater For Your Safety Read Before LightingLighting Instructions Operating Heater Inspecting BurnersCleaning Maintenance Burner Injector Holder and Pilot Air Inlet HoleCleaning Maintenance Service HintsTechnical Service SpecificationsTroubleshooting Observed Problem Possible Cause RemedyMaintenance Cleaning Gas leak. See Warning Statement aboveIllustrated Parts Breakdown Models S26PTA and s26nta ShownParts List Illustrated Parts Breakdown Models S26PTA and s26NtaParts List Replacement Parts AccessoriesCleaning KIT CCK Equipment Shutoff Valve GA5010Parts Central Keep this Warranty Warranty InformationLimited Warranty VENT-FREE GAS Pedestal Stove

S26PTA, S26NTA specifications

Desa S26PTA and S26NTA represent the forefront of agricultural technology, offering robust solutions tailored for modern farming needs. These innovative systems cater specifically to agricultural producers looking to enhance efficiency, streamline operations, and improve yields.

One of the main features of Desa S26PTA is its advanced precision agriculture capabilities. Equipped with state-of-the-art GPS technology, it enables farmers to accurately map their fields, monitor crop health, and apply inputs like fertilizers and pesticides with pinpoint accuracy. This not only conserves resources but also minimizes environmental impact, leading to more sustainable farming practices. Additionally, the S26PTA offers real-time data analytics that helps farmers make informed decisions based on current field conditions.

On the other hand, the S26NTA focuses on nutrient management, delivering a comprehensive solution for soil health. Its integrated sensor technology allows for continuous monitoring of soil conditions, assessing moisture levels, pH, and nutrient content. Farmers can access this data through a user-friendly interface, empowering them to optimize their soil management strategies. By fostering healthier soils, the S26NTA contributes to stronger crop development and increased productivity.

Both the S26PTA and S26NTA leverage Internet of Things (IoT) technologies, connecting various sensors and agricultural equipment. This technological integration provides a holistic view of farming operations, ensuring that farmers can monitor and control their systems remotely. The ability to receive alerts and notifications regarding equipment performance or potential issues is invaluable for proactive management.

Moreover, these systems are designed to be user-friendly, with intuitive interfaces that cater to farmers of all tech-savvy levels. Training and support are also integral parts of the package, ensuring that users can maximize the potential of these advanced technologies.

In conclusion, Desa S26PTA and S26NTA exemplify the evolution of agriculture through technology. Their focus on precision farming, nutrient management, and IoT integration offers powerful tools that enhance productivity and sustainability. As the agricultural sector continues to embrace digital transformation, solutions like these will play a crucial role in shaping the future of farming. Farmers adopting these technologies can look forward to optimized operations, improved crop yields, and a positive environmental impact.