England's Stove Works 25-EPI operation manual Yearly Maintenance

Page 33

YEARLY MAINTENANCE

Convection Blower Cleaning

Since the convection blower does not handle any by-products of combustion, it does not require serious cleaning like the exhaust blower. However, dust from the home and other debris in the air can accumulate on the blades of the convection blower. The convection blower is located on the side of the opposite the combustion blower, and while the insert is pulled out of the fireplace, the convection blower should be visually inspected for any dust build-up. Any dust that has built up on the fan blades can usually be easily removed with a vacuum or a soft paint brush. As always, be certain the stove is cool and unplugged before servicing any components within the unit.

Cleaning Pellet Fines from the Hopper and Auger

Depending on the type and quality of pellets burned in the stove, some accumulation of pellet fines and dust is possible in the hopper. The lowest part of the auger, near the back of the stove, is where most fines will accumulate. With the stove off and unplugged, use a utility vacuum to remove the fines from the auger tube. If the fines cannot be removed from the top of the hopper:

In order to access the combustion blower, the unit will have to be at least partially removed from the fireplace opening (or alternatively, the surround kit and side panels can be removed to access the blower).

Using a 3/16” allen wrench, loosen the set screw on either side of the auger mounting collar.

With a utility vacuum in hand, let the auger assembly slide out of the auger tube just enough so that the vacuum can be used to remove any fines from this area.

Reinstall the auger assembly and tighten the two set screws; reinstall the back panel and the two side panels, being certain to tighten the six (6) retaining screws on the rear of the stove.

Page 33

Image 33
Contents Evolution Pellet Insert & Insert KIT Safety NoticeRetain for your files Table of Contents Introduction Specifications Heating Specifications Tools Required InstallationInstallation Unit Clearances to Combustibles Installation Installation Please Note Outside AIR HOOK-UP Floor Protection Daily Operation Page Control Board Settings Error Codes OFF Power FailureThermostat Operation Thermostat Operation Daily Maintenance Daily Maintenance Daily Maintenance Biweekly Maintenance Biweekly Maintenance Monthly Maintenance Monthly Maintenance Monthly Maintenance Yearly Maintenance Yearly Maintenance Page Yearly Maintenance Yearly Maintenance Trouble­Shooting Guide Unit Shuts Down in 15‐20 Replacing Components Replacing Components Replacing Components Replacing Components Recommended Heat Ranges Wiring Diagram Standard Accessories Optional AccessoriesIllustrated Parts Diagram Replacement Parts List Limited Five 5 Year Warranty Warranty is not transferable Warranty Registration for England’s Stove Works Important Notice

25-EPI specifications

England's Stove Works has been a trusted name in home heating for over three decades, offering a range of high-quality stoves and heaters designed to deliver efficient warmth with exceptional craftsmanship. The 25-EPI model stands out for its blend of innovative technology, functional design, and aesthetic appeal.

The England's Stove Works 25-EPI operates primarily on pellet fuel, a renewable and environmentally friendly energy source. This model is equipped with a robust 45,000 BTU output, making it a powerful choice for heating spaces of up to 2,200 square feet. Its high efficiency translates into significant cost savings on heating bills, making it a practical investment for homeowners.

One of the significant features of the 25-EPI is the large, stainless steel hopper with a capacity of 55 pounds. This hopper allows for extended burn times, meaning it can keep the home warm for longer periods without frequent refueling. The user-friendly control panel simplifies operation, allowing users to adjust the temperature and heating settings effortlessly.

The 25-EPI is designed with a unique airflow system that ensures an even distribution of warmth throughout the space. This system not only enhances efficiency but also ensures a consistent, comfortable indoor climate. Additionally, the built-in combustion blower helps maintain optimal airflow, promoting cleaner burning and maximizing energy efficiency.

Safety is paramount in the design of the 25-EPI. It features a thermal overload protector and a safety shut-off function, providing peace of mind for users. The stove also boasts an easy-to-clean system, ensuring that maintenance is straightforward and hassle-free.

In terms of aesthetics, the 25-EPI blends practical design with a classic look. Its sleek, modern appearance fits well in various home decors, making it an attractive addition to any living space. The durable steel construction provides longevity, reflecting the quality craftsmanship that England's Stove Works is known for.

In summary, the England's Stove Works 25-EPI is a versatile and efficient heating solution, ideal for homeowners looking to reduce their carbon footprint while enjoying the warmth of a pellet stove. With its powerful output, extended burn times, and user-friendly features, it represents an excellent choice for both performance and style in home heating.