England's Stove Works 25-EPI operation manual Installation, Tools Required

Page 7

INSTALLATION

Insert Assembly

Tools Required

oElectric or battery operated drill with 1/8” drill bit.

oSocket wrench with 1/2”, 5/16” and 1/4” sockets.

Parts Included In Insert Conversion Kit

oSurround Top Panel

oSurround Left Panel o Surround Right Panel o Left Side Panel

o Right Side Panel

o Rear Hopper Cover Plate Assembly

Instruction

1.Begin the insert conversion by loosening and removing the six sheet metal screws on the rear of the unit which hold the side panels and rear panel to the stove. These screws can be loosened using a 5/16” socket or open end wrench.

2.Once these screws are removed, the side panels and back panel of the unit can be removed and set aside; these panels will not be used on the insert version of this stove.

3.Next, unlatch the two hopper lid latches near the front of the hopper lid. Loosen and remove the hopper lid hinge retaining screws on the rear of the unit; once these screws have been removed, the freestanding hopper lid can be lifted off of the unit and set aside. This component will not be used on the insert version of this stove.

4.Locate the Rear Hopper Cover Plate Assembly, which was included in the insert conversion kit. This part comes preassembled with the rear hopper cover plate, new hopper lid and hopper lid hinges. It also comes predrilled for the required fasteners.

5.Lay the Rear Hopper Cover Plate Assembly on the top of the hopper lid; be certain the assembly is centered on the stove and that all edges line up. Use the predrilled holes as a drilling template. Without removing the hopper lid gasket material, use a 1/8” drill bit in an electric or battery powered drill to drill a hole at every predrilled location of the rear hopper cover plate.

Page 7

Image 7
Contents Evolution Pellet Insert & Insert KIT Safety NoticeRetain for your files Table of Contents Introduction Specifications Heating Specifications Tools Required InstallationInstallation Unit Clearances to Combustibles Installation Installation Please Note Outside AIR HOOK-UP Floor Protection Daily Operation Page Control Board Settings Error Codes OFF Power FailureThermostat Operation Thermostat Operation Daily Maintenance Daily Maintenance Daily Maintenance Biweekly Maintenance Biweekly Maintenance Monthly Maintenance Monthly Maintenance Monthly Maintenance Yearly Maintenance Yearly Maintenance Page Yearly Maintenance Yearly Maintenance Trouble­Shooting Guide Unit Shuts Down in 15‐20 Replacing Components Replacing Components Replacing Components Replacing Components Recommended Heat Ranges Wiring Diagram Standard Accessories Optional AccessoriesIllustrated Parts Diagram Replacement Parts List Limited Five 5 Year Warranty Warranty is not transferable Warranty Registration for England’s Stove Works Important Notice

25-EPI specifications

England's Stove Works has been a trusted name in home heating for over three decades, offering a range of high-quality stoves and heaters designed to deliver efficient warmth with exceptional craftsmanship. The 25-EPI model stands out for its blend of innovative technology, functional design, and aesthetic appeal.

The England's Stove Works 25-EPI operates primarily on pellet fuel, a renewable and environmentally friendly energy source. This model is equipped with a robust 45,000 BTU output, making it a powerful choice for heating spaces of up to 2,200 square feet. Its high efficiency translates into significant cost savings on heating bills, making it a practical investment for homeowners.

One of the significant features of the 25-EPI is the large, stainless steel hopper with a capacity of 55 pounds. This hopper allows for extended burn times, meaning it can keep the home warm for longer periods without frequent refueling. The user-friendly control panel simplifies operation, allowing users to adjust the temperature and heating settings effortlessly.

The 25-EPI is designed with a unique airflow system that ensures an even distribution of warmth throughout the space. This system not only enhances efficiency but also ensures a consistent, comfortable indoor climate. Additionally, the built-in combustion blower helps maintain optimal airflow, promoting cleaner burning and maximizing energy efficiency.

Safety is paramount in the design of the 25-EPI. It features a thermal overload protector and a safety shut-off function, providing peace of mind for users. The stove also boasts an easy-to-clean system, ensuring that maintenance is straightforward and hassle-free.

In terms of aesthetics, the 25-EPI blends practical design with a classic look. Its sleek, modern appearance fits well in various home decors, making it an attractive addition to any living space. The durable steel construction provides longevity, reflecting the quality craftsmanship that England's Stove Works is known for.

In summary, the England's Stove Works 25-EPI is a versatile and efficient heating solution, ideal for homeowners looking to reduce their carbon footprint while enjoying the warmth of a pellet stove. With its powerful output, extended burn times, and user-friendly features, it represents an excellent choice for both performance and style in home heating.