Harman Stove Company owner manual P61A-2 Manual IGNITION/OPERATION, Ignitor Switch to Manual

Page 14

 

 

P61A-2 MANUAL IGNITION/OPERATION

 

 

The P61A Pellet Stove is capable of manual operation. This also allows the operator to

 

 

manually control operation during an emergency (i.e. ignitor failure, when using a 502H battery

 

 

backup, or when using certain generators.)

o

o

The unit can be switched between "AUTO" and "MANUAL" at any time during operation.

NOTE: When starting the unit in the "AUTO" mode and switching to "MANUAL", the fire must be large enough to start the distribution blower. The start- ing of the blower is a signal that the start cycle is com- pleted and the fire will not go out.

Room Temperature Mode: This setting will produce a room temperature of 70 degrees with the distribution blower at medium speed.

Manual Stove Temperature Mode

Ignitor Switch to "MANUAL"

Room Temperature Mode

The fire will have to be lit with starting gel and a match, or started automatically, see "Automatic Operation". Turn to "Manual" position when the fire is established.

The difference between "AUTO" Room Temperature Mode and "Manual" Room Temperature Mode is that the fire will not go out as the room temperature goes above the control board setting. The unit can only go to low burn and will remain there until it runs out of fuel or until more heat is needed and the feed rate increases. Feed rate adjustments and dial settings are the same as "AUTO" settings.

O

O O

O

This setting will produce a large viewing fire without a distribution blower operating.

Ignitor Switch to "MANUAL"

Stove Temperature Mode

The advantage of this mode is to allow the operator to have a large viewing fire without blowing extra heat into the room.

During operation, with the temperature dial set at #5 or less, the distribution fan will not operate. A #5 on the temperature dial and a #5 on the feed adjuster is approxi- mately 80% output. It is not necessary to operate the distri- bution blower below this point. Therefore, there can be a higher feed rate ( a larger viewing fire) without an excess of hot air blowing into the room.

An example of when to use the Manual Stove Tem- perature Mode is if you want to watch a large fire and the room is aleady up to temperature. The Stove Temperature Mode allows you to have a larger fire and a lower sound level, without the distribution blower.

NOTE: During the use of this mode, if you keep increasing the temperature dial setting to increase the fire size, the distribution blower will automatically come on when the ESPTemperature reaches 350o F, or 81% output.

14 P61A Pellet Stove

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Installation & Operating Manual Safety NoticeP61A Pellet Stove Table of Contents Firebrick Assembly and InstallationUnpacking Flame GuideMobile Home Installation InstallationInstalling With outside air installed, 18î VentingOutside Air VentingVent Pipe #1 Preferred method #2 Preferred method#4 Installing into an existing chimney US only #5 Installing into an existing fireplace chimney US only#7 Installing into an existing chimney US and Canada Minimum flue vent configuration #8 Installing through the ceiling ventStove Temperature Mode Ignitor switch to AutoRoom Temperature Mode Shut-Down ProcedureStarting First Fire Turn Mode Selector to OFFP61A-2 Automatic Start UP Ignitor Switch to Manual P61A-2 Manual IGNITION/OPERATIONFill hopper with pellets and remove ashes as required.1 Starting First Fire Ignitor Switch toMANUAL down positionP61A-2 Manual Start UP P61A-2 Automatic Ignition ESP Control Status light error messagesBlinks In Igniter Auto. Mode Only Indicates P61A-2 Low Draft Voltage Adjustment Low Draft Voltage AdjustmentRoom Sensor and Rear Shield Installation Room Sensor Installation Rear ShieldsRemoving Ashes MaintenanceCleaning Soot and Fly Ash P61A-2 Maintenance Burn Pot Burn Pot Cleaning and MaintenanceHelpful Hints P61A-2 Trouble-ShootingCleaning Burn Pot FuelWeight 249 lbs Blower 135 cfm Feed Rate P61A-2 Feeder and SpecificationsSpecifications23.5 P61A FeederDoor Options Optional TrimHopper Extension OptionsSide Heat Shields P61A-2 Wiring Diagram P61A-2 Parts List Harman Gold Warranty Harman Gold Warranty Year Transferable Limited

P61A-2 specifications

The Harman Stove Company P61A-2 is a premier pellet stove that exemplifies modern design and efficient heating technology. Known for its high performance and user-friendly features, this model is a popular choice among homeowners seeking an eco-friendly heating solution.

One of the standout features of the P61A-2 is its impressive heating capacity. With the ability to produce up to 51,000 BTUs (British Thermal Units), it can effectively heat spaces of up to 2,800 square feet. This makes the stove suitable for both large living areas and open floor plans, ensuring consistent warmth during the chilly months.

The P61A-2 also boasts a sleek, contemporary design that fits seamlessly into various home decors. Available in several finishes, including classic black and rich bronze, it enhances the aesthetic appeal of any room. Its compact size allows for versatile installation options, whether it's in a corner or as a freestanding unit.

In terms of technology, the Harman P61A-2 features an advanced pellet feed system that maximizes efficiency and minimizes waste. This system ensures a steady supply of pellets to the burn pot, optimizing combustion and resulting in high efficiency ratings. The stove has an automatic ignition system, allowing users to easily start it with the push of a button, enhancing convenience and reducing the hassle often associated with traditional wood-burning stoves.

The stove is equipped with a unique heat exchanger and blower system that enhances heat distribution, ensuring warmth is circulated evenly throughout the room. Its adjustable variable-speed blower allows users to customize airflow, catering to their specific heating needs.

Additionally, the P61A-2 is designed with an easy-to-use control panel, providing options for temperature setting, operating modes, and diagnostics. This user-friendly interface allows for effortless operation, even for those new to pellet stoves.

Maintenance is simplified with the P61A-2, as it includes an easy-access clean-out door for quick ash disposal and a removable burn pot for thorough cleaning. The durable construction and high-quality materials ensure longevity, making the P61A-2 a reliable heating solution for years to come.

In summary, the Harman Stove Company P61A-2 combines powerful heating capabilities with innovative technology, a stylish design, and user-friendly features, making it a top choice for efficient home heating.
Top Page Image Contents