Harman Stove Company P61A-2 Assembly and Installation, Unpacking, Firebrick, Flame Guide

Page 4

Assembly and Installation

Shipping Bolts

Note: These same holes are used for mobile home installation

Rear Cover

Panels

Fig. 2

Unpacking

The P61 is bolted to the skid to prevent movement during shipping.

To free the stove from the skid you must remove the hold-down bolts in the rear of the pedestal base.

Removing or Installing rear cover panels

To remove the rear cover panels, loosen the screws slightly and slide the covers outward as shown in the illustration. To reinstall, simply slide back into place and retighten the screws.

Firebrick

Install the firebrick vertically on the angle above the burnpot.

Flame Guide

Install the cast iron flame guide on top of the burnpot and make sure it is fully seated against the auger opening. The bottom of the flame guide is marked

38+.

DO NOT INSTALLA FLUE DAMPER IN THE EXHAUST VENTING SYSTEM OF THIS UNIT.

DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVINGANOTHER APPLIANCE.

INSTALLVENTAT CLEARANCES SPECIFIED BY THE MANUFACTURER

Mobile home installation should be done in accordance with the Manufactured Home and Safety Standard (HUD), CFR 3280, Part 24.

4 P61A Pellet Stove

WARNING

DO NOT INSTALL IN SLEEPING ROOM

CAUTION

THE STRUCTURAL INTEGRITY OF THE MOBILE HOME FLOOR, WALL, AND CEILING/ROOF MUST BE MAINTAINED.

CAUTION

KEEPCOMBUSTIBLE MATERIALS (SUCHAS GRASS, LEAVES, ETC.)AT LEAST 3

FEETAWAYFROMTHE FLUE OUTLETON

THE OUTSIDE OF THE BUILDING.

Image 4
Contents Installation & Operating Manual Safety NoticeP61A Pellet Stove Table of Contents Assembly and Installation UnpackingFirebrick Flame GuideInstalling InstallationMobile Home Installation With outside air installed, 18î VentingVent Pipe VentingOutside Air #1 Preferred method #2 Preferred method#4 Installing into an existing chimney US only #5 Installing into an existing fireplace chimney US only#7 Installing into an existing chimney US and Canada Minimum flue vent configuration #8 Installing through the ceiling ventIgnitor switch to Auto Room Temperature ModeStove Temperature Mode Shut-Down ProcedureP61A-2 Automatic Start UP Turn Mode Selector to OFFStarting First Fire Ignitor Switch to Manual P61A-2 Manual IGNITION/OPERATIONP61A-2 Manual Start UP Starting First Fire Ignitor Switch toMANUAL down positionFill hopper with pellets and remove ashes as required.1 Blinks In Igniter Auto. Mode Only Indicates Status light error messagesP61A-2 Automatic Ignition ESP Control P61A-2 Low Draft Voltage Adjustment Low Draft Voltage AdjustmentRoom Sensor and Rear Shield Installation Room Sensor Installation Rear ShieldsCleaning MaintenanceRemoving Ashes Soot and Fly Ash P61A-2 Maintenance Burn Pot Burn Pot Cleaning and MaintenanceP61A-2 Trouble-Shooting Cleaning Burn PotHelpful Hints FuelP61A-2 Feeder and Specifications Specifications23.5Weight 249 lbs Blower 135 cfm Feed Rate P61A FeederDoor Options Optional TrimSide Heat Shields OptionsHopper Extension P61A-2 Wiring Diagram P61A-2 Parts List Harman Gold Warranty Harman Gold Warranty Year Transferable Limited

P61A-2 specifications

The Harman Stove Company P61A-2 is a premier pellet stove that exemplifies modern design and efficient heating technology. Known for its high performance and user-friendly features, this model is a popular choice among homeowners seeking an eco-friendly heating solution.

One of the standout features of the P61A-2 is its impressive heating capacity. With the ability to produce up to 51,000 BTUs (British Thermal Units), it can effectively heat spaces of up to 2,800 square feet. This makes the stove suitable for both large living areas and open floor plans, ensuring consistent warmth during the chilly months.

The P61A-2 also boasts a sleek, contemporary design that fits seamlessly into various home decors. Available in several finishes, including classic black and rich bronze, it enhances the aesthetic appeal of any room. Its compact size allows for versatile installation options, whether it's in a corner or as a freestanding unit.

In terms of technology, the Harman P61A-2 features an advanced pellet feed system that maximizes efficiency and minimizes waste. This system ensures a steady supply of pellets to the burn pot, optimizing combustion and resulting in high efficiency ratings. The stove has an automatic ignition system, allowing users to easily start it with the push of a button, enhancing convenience and reducing the hassle often associated with traditional wood-burning stoves.

The stove is equipped with a unique heat exchanger and blower system that enhances heat distribution, ensuring warmth is circulated evenly throughout the room. Its adjustable variable-speed blower allows users to customize airflow, catering to their specific heating needs.

Additionally, the P61A-2 is designed with an easy-to-use control panel, providing options for temperature setting, operating modes, and diagnostics. This user-friendly interface allows for effortless operation, even for those new to pellet stoves.

Maintenance is simplified with the P61A-2, as it includes an easy-access clean-out door for quick ash disposal and a removable burn pot for thorough cleaning. The durable construction and high-quality materials ensure longevity, making the P61A-2 a reliable heating solution for years to come.

In summary, the Harman Stove Company P61A-2 combines powerful heating capabilities with innovative technology, a stylish design, and user-friendly features, making it a top choice for efficient home heating.