Frigidaire FGGF3031KB Setting Oven Controls, Setting the clock, Setting a silent control panel

Page 13

Setting the clock

When the appliance is first plugged in or when the power supply to the appliance has been interrupted, the display will flash "12:00". It is recommended to always set the clock for the correct time of day before using the appliance.

To set the clock:

1.Press once (do not hold pad down).

2.Within 5 seconds, press and hold the or until the correct time of day appears in the display.

NOTE

The clock cannot be changed during any timed bake or self-clean cycle.

Changing between continuous bake setting or 12-Hour Energy Saving feature

The oven control has a built-in 12-Hour Energy Saving feature that will shut off the oven if the control is left on for more than 12 hours. The oven can be programmed to override this feature for continuous baking.

Changing to continuous bake setting:

1.Press and hold down for 5 seconds until tone is

heard, " — — hr" will appear in display for continuous cooking. The current time of day will return to the display.

2.To cancel the continuous bake setting, press

and hold for 5 seconds until tone is heard. "12hr" will appear in display indicating that the control has returned to the 12-Hour Energy Saving feature.

SETTING OVEN CONTROLS

Changing temperature display (°F or °C)

The electronic oven control is set to display °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 287°C).

To change the temperature to display °C (Celsius) or from °C to °F (control should not be set for Bake or Self-clean when setting this feature):

1.Press . "— —" appears in the display.

2.Press and hold the until "HI" appears in the display.

3.Press and hold until °F or °C appears in the display.

4.Press the or to change °F to °C or °C to °F.

5.Press any control pad to return to normal operating mode.

Setting a silent control panel

When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed

for silent operation. Press and hold . After 7

seconds, the control will beep once. This will block the controls from sounding when a pad is pressed. To return

the sound, press and hold again for 7 seconds until the control beeps once.

NOTE

The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and during preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When the preheat indicator light turns OFF, your oven is

ready.

13

Image 13
Contents Use&Care Product Record and Registration ContentsDefinitions Important Safety InstructionsImportant Safety Instructions Important Instructions for Using Your Cooktop Conversion to Liquefied Petroleum Gas Grounding InstructionsYour gas range features include Features AT a GlanceBefore Setting Oven Controls To assemble the Effortless Oven Rack system Effortless Oven Rack systemSpecial dark coating on the left and right rack Using proper cookware Before Setting Surface ControlsCorrect flame setting Incorrect flame setting Set proper burner flame sizeSetting surface controls Setting Surface ControlsSetting a surface burner Home CanningOven Control Functions Read the Instructions Carefully Before Using the OvenSetting the clock Setting Oven ControlsChanging temperature display F or C Setting a silent control panelSetting the minute timer Setting oven lockoutTo set the oven lockout feature for models with Quick Bake To change the timer while it is in useSetting timed bake and delayed timed bake features Setting bakeTo change the oven temperature after bake has started To set bakeWhen the set bake time runs out How Quick Bake works Setting Quick BakeSuggestions for Quick Bake Suggested broil settings table gas oven Setting broilTo set Broil Close the oven doorTo adjust oven temperature Adjusting the oven temperatureOperating the oven light Self-cleaning SELF-CLEANINGAdhere to the following self-clean precautions Setting a self-clean cycle Stopping or interrupting a self-clean cycleWhen the self-clean cycle has completed Cleaning recommendation table Care & CleaningReplacing oven light Cleaning the cooktop and surface burnersTo remove oven door Removing and replacing the lift-off oven doorTo replace oven door Care & Cleaning section Problem SolutionBefore YOU Call Solutions to common problems Exclusions This warranty does not cover the following Major Appliance Warranty