Moxa Technologies user manual What to Check before You Install the AWK-1200-AP, Step

Page 11

MOXA AirWorks AWK-1200-AP User’s Manual

Getting Started

What to Check before You Install the AWK-1200-AP

Before installing the AWK-1200-AP for outdoor applications or hard-to-reach locations, we recommend configuring and testing all devices first.

For configuring the AWK-1200-AP, please follow the steps below to power up the AWK-1200-AP (refer to Figure 2-4).

Step 1:

Connect the DC plug of the AC/DC power adapter into the DC Input Port of the Inline Power Injector and the wall-mount plug into a power outlet or power strip (refer to page 2-2). The Power LED on the Inline Power Injector will light up.

Step 2:

Run the cross-over Ethernet cable from the Data Input Port (refer to page 2-2) to the Ethernet port on a PC.

Step 3:

Connect the 30 m CAT 5 Ethernet cable to the AWK-1200-AP. Hand tighten the connector.

Step 4:

Connect the other end of the 30 m CAT 5 cable to the PoE labeled POWER & DATA OUT. This is the power side of the PoE that will power up the AWK-1200-AP.

When the AWK-1200-AP receives power over the Ethernet cable, the AWK-1200-AP will start the boot up sequence, and the Active LED on the Inline Power Injector will light up.

You can use a web browser, such as Microsoft Internet Explorer or Netscape Navigator, to configure the AWK-1200-AC from a remote host or PC.

Figure 2-4

2-4

Image 11
Contents First Edition, July Moxa AirWorks AWK-1200-AP User’s ManualDisclaimer Copyright NoticeTrademarks Table of Contents Appendix C Regulatory Compliance Information Introduction System Requirements Package ChecklistProduct Features OverviewInline Power Injector PoE Getting Started Interface on the AWK-1200-AP Unit First Time Installation and ConfigurationInterface on the Inline Power Injector Locating the Data Input and PoE PortsMounting the AWK-1200-AP on a Wall or Mast Device FiguresStep What to Check before You Install the AWK-1200-APWeb Access Procedures Basic ConfigurationBasic Configuration Steps Web ConfigurationWeb Configuration Structure Help LAN SettingsWireless Network Name also called the Ssid Configuring the Wireless SsidConfiguring Wireless Encryption Changing the Supervisor Account & Password Updating the Firmware Upgrading the FirmwareMoxa AirWorks AWK-1200-AP User’s Manual Getting Started Web Console Configuration Basic WirelessWPA-Personal and WPA-Enterprise Super G ModeMode WPA-Enterprise WPA-PersonalMAC Address Filter Enable MAC Address FilterAdvanced MAC Address List Filter SettingsAdvance Wireless Add/Edit MAC AddressFragmentation Threshold 802.11d EnableTransmit Power WDS EnableTools AdminSystem Restore Configuration from FileSave Configuration To Wireless Network Setup Wizard TimeFirmware Reboot the DeviceRestore all Settings to the Factory Defaults Firmware Information Firmware UpgradeStatus Device InfoRate SignalLAN Computers MAC AddressView Levels Apply Log Settings NowLogs What to ViewStatistics Errors Wlan SpecificationsRegulatory Approvals Basic Default SettingsDhcp MAC Address Filter Advanced WirelessFirmware Federal Communications Commission FCC Requirements, Part Regulatory Compliance Information15.21 Prohibition of co-location Regulatory information / Disclaimers MPE Statement Safety InformationSafety Information

AWK-1200-AP specifications

Moxa Technologies AWK-1200-AP is a robust wireless access point designed to provide reliable and high-performance connectivity for industrial applications. Featuring a rugged design and extensive functionalities, the AWK-1200-AP is ideal for mission-critical environments where consistent network performance is paramount.

One of the main features of the AWK-1200-AP is its dual-band wireless connectivity, supporting both 2.4 GHz and 5 GHz frequencies. This capability allows users to choose the optimal frequency band based on their specific networking needs, significantly reducing interference and improving overall network efficiency. With support for IEEE 802.11 a/b/g/n standards, the access point delivers data rates of up to 300 Mbps, ensuring high-speed connections for multiple devices.

The AWK-1200-AP is designed to operate in harsh industrial environments, with an IP30-rated enclosure that provides protection against dust and moisture. Additionally, its wide operating temperature range of -40°C to 75°C allows for deployment in extreme conditions, making it suitable for various applications in sectors like manufacturing, transportation, and energy.

Another critical characteristic of the AWK-1200-AP is its advanced security features. It supports WPA/WPA2 encryption protocols, ensuring that data transmitted over the wireless network is secure. Moreover, the access point features MAC address filtering, which allows administrators to control access to the network, further enhancing security.

The AWK-1200-AP also excels in network management, offering various protocols such as SNMP, which facilitates easy monitoring and configuration. Its user-friendly web interface simplifies the setup process, allowing users to configure and manage the device with ease. The access point can also be integrated with Moxa's MXview software for enhanced network visualization and management capabilities.

For reliable connectivity, the AWK-1200-AP supports redundancy features such as the 802.1D Spanning Tree Protocol (STP) and RSTP (Rapid Spanning Tree Protocol), ensuring uninterrupted network access in case of hardware failures.

With its combination of robust design, high-performance capabilities, and advanced security features, the Moxa Technologies AWK-1200-AP stands out as an excellent choice for organizations looking to implement reliable wireless networking solutions in industrial settings.