Moxa Technologies AWK-1200-AP Basic Configuration Steps, Logging into the Web Interface

Page 12

MOXA AirWorks AWK-1200-AP User’s Manual

Getting Started

Basic Configuration

Basic Configuration Steps

This section describes a basic 2-step configuration procedure to set up the AWK-1200-AP.

Step 1:

Modify the factory-default parameters on the web page “/BASIC/LAN/”, click Save Settings to save the changes, and then click Continue.

Step 2:

Modify the factory-default parameters on the web page “/BASIC/Wireless/”, click Save Settings to save the changes, and then click Reboot the Device to take activate the configuration changes.

Logging into the Web Interface

Users can access and configure the AWK-1200-AP through a web browser interface.

Web Configuration

Before configuring the AWK-1200-AP, you need to know the IP Address assigned to the unit. The factory default IP Address is 192.168.127.253. To establish a connection, type http://192.168.127.253 in the browser’s address field.

Web Access Procedures

Once you identify the IP Address assigned to the AWK-1200-AP, use the web browser to configure the AWK-1200-AP through the browser Interface. The following procedure explains how to configure each item.

Step 1: Open your browser and enter the IP address.

Step 2: Press <ENTER>. The AWK-1200-AP Login screen should appear as shown in Figure 2-5.

Figure 2-5

2-5

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Moxa AirWorks AWK-1200-AP User’s Manual First Edition, JulyCopyright Notice TrademarksDisclaimer Table of Contents Appendix C Regulatory Compliance Information Introduction Package Checklist Product FeaturesOverview System RequirementsInline Power Injector PoE Getting Started First Time Installation and Configuration Interface on the Inline Power InjectorLocating the Data Input and PoE Ports Interface on the AWK-1200-AP UnitDevice Figures Mounting the AWK-1200-AP on a Wall or MastWhat to Check before You Install the AWK-1200-AP StepBasic Configuration Basic Configuration StepsWeb Configuration Web Access ProceduresWeb Configuration Structure LAN Settings HelpConfiguring the Wireless Ssid Wireless Network Name also called the SsidConfiguring Wireless Encryption Changing the Supervisor Account & Password Upgrading the Firmware Updating the FirmwareMoxa AirWorks AWK-1200-AP User’s Manual Getting Started Web Console Configuration Wireless BasicSuper G Mode ModeWPA-Personal and WPA-Enterprise WPA-Personal WPA-EnterpriseEnable MAC Address Filter AdvancedMAC Address Filter Filter Settings Advance WirelessAdd/Edit MAC Address MAC Address List802.11d Enable Transmit PowerWDS Enable Fragmentation ThresholdAdmin ToolsRestore Configuration from File Save Configuration To Wireless Network Setup WizardTime SystemReboot the Device Restore all Settings to the Factory DefaultsFirmware Firmware Upgrade StatusDevice Info Firmware InformationSignal LAN ComputersMAC Address RateApply Log Settings Now LogsWhat to View View LevelsStatistics Errors Specifications WlanRegulatory Approvals Default Settings BasicDhcp Advanced Wireless MAC Address FilterFirmware Regulatory Compliance Information 15.21 Prohibition of co-locationFederal Communications Commission FCC Requirements, Part MPE Statement Safety Information Safety InformationRegulatory information / Disclaimers

AWK-1200-AP specifications

Moxa Technologies AWK-1200-AP is a robust wireless access point designed to provide reliable and high-performance connectivity for industrial applications. Featuring a rugged design and extensive functionalities, the AWK-1200-AP is ideal for mission-critical environments where consistent network performance is paramount.

One of the main features of the AWK-1200-AP is its dual-band wireless connectivity, supporting both 2.4 GHz and 5 GHz frequencies. This capability allows users to choose the optimal frequency band based on their specific networking needs, significantly reducing interference and improving overall network efficiency. With support for IEEE 802.11 a/b/g/n standards, the access point delivers data rates of up to 300 Mbps, ensuring high-speed connections for multiple devices.

The AWK-1200-AP is designed to operate in harsh industrial environments, with an IP30-rated enclosure that provides protection against dust and moisture. Additionally, its wide operating temperature range of -40°C to 75°C allows for deployment in extreme conditions, making it suitable for various applications in sectors like manufacturing, transportation, and energy.

Another critical characteristic of the AWK-1200-AP is its advanced security features. It supports WPA/WPA2 encryption protocols, ensuring that data transmitted over the wireless network is secure. Moreover, the access point features MAC address filtering, which allows administrators to control access to the network, further enhancing security.

The AWK-1200-AP also excels in network management, offering various protocols such as SNMP, which facilitates easy monitoring and configuration. Its user-friendly web interface simplifies the setup process, allowing users to configure and manage the device with ease. The access point can also be integrated with Moxa's MXview software for enhanced network visualization and management capabilities.

For reliable connectivity, the AWK-1200-AP supports redundancy features such as the 802.1D Spanning Tree Protocol (STP) and RSTP (Rapid Spanning Tree Protocol), ensuring uninterrupted network access in case of hardware failures.

With its combination of robust design, high-performance capabilities, and advanced security features, the Moxa Technologies AWK-1200-AP stands out as an excellent choice for organizations looking to implement reliable wireless networking solutions in industrial settings.
Top Page Image Contents