MOXA AirWorks | Web Console Configuration |
Restore Configuration from File
Use this option to load previously saved Access Point configuration settings.
Save Configuration To Wireless Network Setup Wizard
If your PC’s operating system is Windows XP Service Pack 2 (SP2) or later and you are using Windows Internet Explorer (IE) as your browser, you can use this option to save key parts of the Access Point’s current wireless security settings to your PC with Windows Connect Now (WCN) technology. The settings will then be available to propagate to other wireless devices.
Time
The Time Configuration option allows you to configure, update, and maintain the correct time on the Access Point’s internal system clock.
Set the Date and Time Manually
If you do not have the NTP Server option in effect, you can either manually set the time for your Access Point here, or you can click the Copy Your Computer’s Time Settings button to copy the time from the computer you are using. (Make sure that computer’s time is set correctly.)
NOTE | If the Access Point loses power for any reason, it cannot keep its clock running, and will not have |
| the correct time when it is started again. To maintain the correct time for schedules and logs, you |
| must either enter the correct time after you restart the Access Point, or you must enable the NTP |
| Server option. |
|
|
System
This section allows you to reboot the device, and restore the Access Point to the factory default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you’ve created.