Moxa Technologies AWK-1200-AP user manual First Time Installation and Configuration

Page 9

MOXA AirWorks AWK-1200-AP User’s Manual

Getting Started

First Time Installation and Configuration

After unpacking the system, make sure the following items are present and in good condition. Refer to pictures below to see what each item looks like.

1.AWK-1200-AP

2.Power cord

3.48 VDC, 0.38A Inline Power Injector (PoE)

4.30 m RJ45 CAT-5 Ethernet cable

5.1.8 m RJ45 CAT-5 cross-over cable

6.3 m grounding wire

7.Document and Software CD

8.Wall/mast mounting kit

9.Screws

10.Two 5 dBi Omni-type antennas (N-type connector)

1. AWK-1200-AP

2. Power cord

3. PSE Injector

4. 30 m cable

 

 

 

 

 

5.

1.8 m cable

6. Grounding wire

7. CD

8. Wall mount

 

 

 

 

 

9.

Screws

10. Antenna

 

 

 

 

 

 

 

Locating the Data Input and PoE Ports

After unpacking the system, locate the following ports on the AWK-1200-AP unit. The numbers next to each item refer to the pictures in Figure 2-1.

Interface on the AWK-1200-AP Unit

yEthernet Port 1: for connecting the 30 m RJ45 CAT-5 Ethernet cable.

Interface on the Inline Power Injector

yData Input Port 2: for connecting the cross-over Ethernet Cable to a PC or straight-through Ethernet cable to a Hub, Switch, or Router.

yDC Input Port 3: power adaptor; 48V, 0.38A DC input.

yPower & Data Output Port 4: for connecting the 30 m RJ45 CAT-5 Ethernet cable.

2-2

Page 8 Page 10
Image 9
Page 8 Page 10
Contents First Edition, July Moxa AirWorks AWK-1200-AP User’s ManualCopyright Notice TrademarksDisclaimer Table of Contents Appendix C Regulatory Compliance Information Introduction Product Features Package ChecklistOverview System RequirementsInline Power Injector PoE Getting Started Interface on the Inline Power Injector First Time Installation and ConfigurationLocating the Data Input and PoE Ports Interface on the AWK-1200-AP UnitMounting the AWK-1200-AP on a Wall or Mast Device FiguresStep What to Check before You Install the AWK-1200-APBasic Configuration Steps Basic ConfigurationWeb Configuration Web Access ProceduresWeb Configuration Structure Help LAN SettingsWireless Network Name also called the Ssid Configuring the Wireless SsidConfiguring Wireless Encryption Changing the Supervisor Account & Password Updating the Firmware Upgrading the FirmwareMoxa AirWorks AWK-1200-AP User’s Manual Getting Started Web Console Configuration Basic WirelessSuper G Mode ModeWPA-Personal and WPA-Enterprise WPA-Enterprise WPA-PersonalEnable MAC Address Filter AdvancedMAC Address Filter Advance Wireless Filter SettingsAdd/Edit MAC Address MAC Address ListTransmit Power 802.11d EnableWDS Enable Fragmentation ThresholdTools AdminSave Configuration To Wireless Network Setup Wizard Restore Configuration from FileTime SystemReboot the Device Restore all Settings to the Factory DefaultsFirmware Status Firmware UpgradeDevice Info Firmware InformationLAN Computers SignalMAC Address RateLogs Apply Log Settings NowWhat to View View LevelsStatistics Errors Wlan SpecificationsRegulatory Approvals Basic Default SettingsDhcp MAC Address Filter Advanced WirelessFirmware Regulatory Compliance Information 15.21 Prohibition of co-locationFederal Communications Commission FCC Requirements, Part MPE Statement Safety Information Safety InformationRegulatory information / Disclaimers

AWK-1200-AP specifications

Moxa Technologies AWK-1200-AP is a robust wireless access point designed to provide reliable and high-performance connectivity for industrial applications. Featuring a rugged design and extensive functionalities, the AWK-1200-AP is ideal for mission-critical environments where consistent network performance is paramount.

One of the main features of the AWK-1200-AP is its dual-band wireless connectivity, supporting both 2.4 GHz and 5 GHz frequencies. This capability allows users to choose the optimal frequency band based on their specific networking needs, significantly reducing interference and improving overall network efficiency. With support for IEEE 802.11 a/b/g/n standards, the access point delivers data rates of up to 300 Mbps, ensuring high-speed connections for multiple devices.

The AWK-1200-AP is designed to operate in harsh industrial environments, with an IP30-rated enclosure that provides protection against dust and moisture. Additionally, its wide operating temperature range of -40°C to 75°C allows for deployment in extreme conditions, making it suitable for various applications in sectors like manufacturing, transportation, and energy.

Another critical characteristic of the AWK-1200-AP is its advanced security features. It supports WPA/WPA2 encryption protocols, ensuring that data transmitted over the wireless network is secure. Moreover, the access point features MAC address filtering, which allows administrators to control access to the network, further enhancing security.

The AWK-1200-AP also excels in network management, offering various protocols such as SNMP, which facilitates easy monitoring and configuration. Its user-friendly web interface simplifies the setup process, allowing users to configure and manage the device with ease. The access point can also be integrated with Moxa's MXview software for enhanced network visualization and management capabilities.

For reliable connectivity, the AWK-1200-AP supports redundancy features such as the 802.1D Spanning Tree Protocol (STP) and RSTP (Rapid Spanning Tree Protocol), ensuring uninterrupted network access in case of hardware failures.

With its combination of robust design, high-performance capabilities, and advanced security features, the Moxa Technologies AWK-1200-AP stands out as an excellent choice for organizations looking to implement reliable wireless networking solutions in industrial settings.
Top Page Image Contents