Moxa Technologies AWK-1200-AP user manual Upgrading the Firmware, Updating the Firmware

Page 18

MOXA AirWorks AWK-1200-AP User’s Manual

Getting Started

ADMIN PASSWORD

Change the ADMIN PASSWORD’s user name and password in the ADMIN PASSWORD Account field, click Save Setting, and then Reboot the Device to take activate the configuration changes.

Upgrading the Firmware

Updating the Firmware

Enter the TOOLS Æ FIRMWARE page as shown in Figure 2-10to upgrade the AWK-1200-AP’s firmware. You must select which file (Program image) you want to upgrade, and then click the Upload button to start the upgrade process.

NOTE	It takes about 1 minute to complete the restart process.

Figure 2-10

ATTENTION

The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency when using integrated antennas. Any changes or modification to the product not expressly approved by the Original Manufacture could void the user’s authority to operate this device.

2-11

Image 18

Contents Moxa AirWorks AWK-1200-AP User’s Manual First Edition, JulyCopyright Notice TrademarksDisclaimer Table of Contents Appendix C Regulatory Compliance Information Introduction Overview Package ChecklistProduct Features System RequirementsInline Power Injector PoE Getting Started Locating the Data Input and PoE Ports First Time Installation and ConfigurationInterface on the Inline Power Injector Interface on the AWK-1200-AP UnitDevice Figures Mounting the AWK-1200-AP on a Wall or MastWhat to Check before You Install the AWK-1200-AP StepWeb Configuration Basic ConfigurationBasic Configuration Steps Web Access ProceduresWeb Configuration Structure LAN Settings Help Configuring the Wireless Ssid Wireless Network Name also called the SsidConfiguring Wireless Encryption Changing the Supervisor Account & Password Upgrading the Firmware Updating the FirmwareMoxa AirWorks AWK-1200-AP User’s Manual Getting Started Web Console Configuration Wireless BasicSuper G Mode ModeWPA-Personal and WPA-Enterprise WPA-Personal WPA-EnterpriseEnable MAC Address Filter AdvancedMAC Address Filter Add/Edit MAC Address Filter SettingsAdvance Wireless MAC Address ListWDS Enable 802.11d EnableTransmit Power Fragmentation ThresholdAdmin ToolsTime Restore Configuration from FileSave Configuration To Wireless Network Setup Wizard SystemReboot the Device Restore all Settings to the Factory DefaultsFirmware Device Info Firmware UpgradeStatus Firmware InformationMAC Address SignalLAN Computers RateWhat to View Apply Log Settings NowLogs View LevelsStatistics Errors Specifications WlanRegulatory Approvals Default Settings BasicDhcp Advanced Wireless MAC Address FilterFirmware Regulatory Compliance Information 15.21 Prohibition of co-locationFederal Communications Commission FCC Requirements, Part MPE Statement Safety Information Safety InformationRegulatory information / Disclaimers