Casablanca Fan Company 59077, 59078 operation manual Maintenance & Cleaning, Globe

Page 17

Maintenance & Cleaning

OFF

Be sure to turn off power to the fan before performing any maintenance or relamping.

Globe

Changing the bulbs - carefully rotate the globe

counterclockwise until it comes loose from the tabs and lower it from inside the light kit. Unscrew the bulb and replace it with a bulb of the same type and wattage. Reinstall the globe.

www.CasablancaFanCo.com 1.888.227.2178

Cleaning the fan - use soft brushes or cloths to prevent scratching. Cleaning products may damage the finishes.

Image 17

Contents What to Expect with Your Installation Table of ContentsWiring Operation Troubleshooting1 Standard Downrod What to Expect with Your Installation2 Shorter Downrod 3 Longer DownrodWire Strippers Tools NeededPower Drill optional Ladder1OPTION OPTIONto hang the fan from a to hang the fan from a flat ceilingFor angled ceilings, point Ceiling BracketMake sure all four bumpers are If you are unable to do thisOption DownrodIf you need a different downrod length follow these steps Steps 1-5 to remove standard downrod pipe3/8” Downrod continuedHAND TIGHTEN DO NOT PICK THE FAN UP BY THE CANOPY OR WIRES. Place the downrodLet the canopy sit loosely on top of the fan ball into the slot in the ceiling bracketWiring Wiring continued Wall Control Screw CanopyHoles Note Fan style may vary BladesInsert grommets found in thehardware See next page for fan operation instructions Light KitNotch Globeto the receiver and ready to use OperationThe remote transmitter is already paired Operation continued PowerMaintenance & Cleaning AUTHORIZED SERVICE CENTERS TroubleshootingLights dim when turned on or do not turn on at all Fan doesn’t workInstalling Multiple Fans with Independently Operating Remote Controls Troubleshooting continuedInstalling Multiple Fans Operating on a Single Remote Control Installing One Fan Operating on Multiple Remote Controls