ENGLISH
System connections (continued)
Preparation for Use
E-19
!TV connection
Three types of sockets (VIDEO OUT,
Connecting to a TV with a video input socket:
You can enjoy DVD images by connecting your TV and the main unit with the supplied video cable.
Set the video mode to "Interlace" (default setting). For the proce- dure, refer to "Changing the video output mode".
Main unit
To video |
| |
output socket | Video signal | |
TV | Video cable | |
(supplied) | ||
| ||
To video |
| |
input socket | ||
Notes:
"Change the TV input in accordance with the connected socket.
"Do not connect other equipment (VCR, etc.) between the TV and the main unit. Images may be distorted.
"Refer to the operation manual of the equipment to be connected.
"Insert the plugs fully to avoid fuzzy pictures or noise.
Changing the video output mode:
1Insert a DVD disc (steps 1 - 3, page 25).
2In the stop mode, press the SHIFT button and SCAN SELECT button on the remote control.
Each time these buttons are pressed, the mode will change in the following order:
Interlace | Select this for a | |
|
| (use a video cable, |
|
| |
|
| component video cable). |
|
| |
Progressive | Select this for a progressive scan TV | |
(No display) | (use a component video cable). | |
Caution:
To enjoy images on a TV, make sure to select the right items for the following four: video cable, TV's video input socket, and this unit's video output socket and video output mode. Otherwise, images do not appear properly.
What is progressive scanning?
The conventional TV system displays 30 frames of still images per second to complete sequential movement (interlaced scanning). Whereas, progressive scanning displays one frame every 1/60th of a second (60 frames per second) to realise
Compatibility of the progressive scan TV
Some progressive scan TVs are not fully compatible with this prod- uct, which may cause image distortion. In this case, switch the vid- eo mode from "Progressive" to "Interlace".
05/2/2 | TINSZA048AWZZ |