Sharp HT-X1W Features, E-53, Speaker level setting, button to select SP LEVEL, Advanced, tervals

HT-X1W

ENGLISH

Changing the default setting of the amplifier (continued)

" Speaker level setting " Test tone

If sounds from the speakers are uneven, you can equalise them by adjusting the speaker levels.

1Press the SET UP AMP button.

2Within 10 seconds, press the or

Amplifier Setup
button to select "SP LEVEL",	Speaker Delay
and then press the ENTER button.
	Speaker Level
	Test Tone
Select	ENTER Enter	Return

You can check each speaker sound by a test tone. Readjust the vol- ume set in "Speaker level setting".

1Press the SET UP AMP button.

2Within 10 seconds, press the or

Amplifier Setup
button to select "TONE", and	Speaker Delay
press the ENTER button.
	Speaker Level
	Test Tone
Select	ENTER Enter	Return

Features

3Within 10 seconds, press the or button to select the desired speaker.

The indicator of the selected speaker flashes.

Speaker Level

Front	L	0	dB
Center		0	dB
Front	R	0	dB
Surround	R	0	dB
Surround	L	0	dB
Sub Woofer		0	dB
Select		Change	Return

The test tone will be heard from each speaker in order, at about 2-second intervals.

Test Tone

Front	L	0	dB
Center		0	dB
Front	R	0	dB
Surround	R	+3	dB
Surround	L	0	dB

Advanced

E-53

4Within 10 seconds, press the or

button to adjust the level.	Speaker Level
	Front	L	0	dB
! You can adjust the level at 1 dB in-	Center		0	dB
tervals.	Front	R	0	dB
	Surround	R	+3	dB
! To set the distance of other speak-	Surround	L	0	dB
ers, repeat the operation from step	Sub Woofer		0	dB
	Select	Change		Return
3.

5Press the RETURN button twice. The setting is complete.

Notes:

!The speaker level setting is only available for the front speakers and subwoofer/amplifier unit when the surround is "STEREO" or "VIRTUAL (SURROUND)".

!If subwoofer/amplifier unit sound is distorted, lower the sub- woofer/amplifier unit level.

Sub Woofer		0 dB
Select	Change	Return

To adjust speaker levels

Whilst the test tone is heard:

Adjust the level with the or button.

Press the or to select a speaker.

3Press the RETURN button twice. The setting is complete.

Note:

The test tone is produced only from the front speakers and sub- woofer/amplifier unit when the surround is "STEREO" or "VIRTUAL (SURROUND)".

05/2/2 HT-X1W(LA)E6.fm TINSZA048AWZZ