ENGLISH
Changing the default setting of the amplifier
Advanced Features
E-51
Change settings according to the connected speakers.
Speaker delay setting (See page 52.)
Speaker level setting (See page 53.)
Test tone (See page 53.)
Example:
If the right surround speaker is 3.3 m (10 feet) away from the listen- ing position, change settings as shown below (adjust the SR).
CT |
|
| CT |
| |
FL | FR |
| FL | FR | |
SW |
| SW |
|
| |
SL | SR | SL | 3.3 m |
| |
(10 feet) | SR | ||||
|
|
|
Default setting: 2 m (6 feet)
1In "Speaker delay setting", set the right surround speaker (SR) to 3.3 m (10 feet).
2In "Speaker level setting", slightly increase the level of the right surround speaker as it is a little farther than others (see page 53).
3In "Test tone", check the sound from each speaker (see page 53).
If you press during the operation, you can go back one step.
| Speaker type | Delay range | Level range | ||
|
|
|
|
|
|
FL | Front speaker (Left) | 0.1 to 9.0 m | - 6 dB to + 6 dB | ||
|
|
|
|
|
|
CT | Centre speaker | 0.1 to 9.0 m | - 6 dB to + 6 dB | ||
|
|
|
|
|
|
FR | Front speaker (Right) | 0.1 to 9.0 m | - 6 dB to + 6 dB | ||
|
|
|
|
|
|
SR | Surround speaker (Right) | 0.1 to 9.0 m | - 6 dB to + 6 dB | ||
|
|
|
|
|
|
SL | Surround speaker (Left) | 0.1 to 9.0 m | - 6 dB to + 6 dB | ||
|
|
|
|
|
|
SW | Subwoofer/amplifier unit |
|
|
| - 10 dB to + 10 dB |
|
|
| |||
|
|
|
|
|
|
Default settings:
Delay - - - 2 m (6 feet)
Level - - - 0 dB (FL, CT, FR, SR, SL), + 5 dB (SW)
05/2/2 | TINSZA048AWZZ |